Bedienungsanleitung Maxdata Quantum SuperLoader 3 (Seite 2 von 8) (Englisch)

650498

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

SuperLoader 3 Quick Start Guide

SCSI Bus Requirements 0

You must connect the autoloader to one of the following

SCSI bus types:

• Ultra 320 SCSI-3, LVD SE SCSI bus

• Ultra 160 SCSI-3, LVD SE SCSI bus

General Information

Your SCSI host adaptor card must also support the SCSI bus

type used to connect the autoloader. If you use a LVD SCSI

bus, use a host adapter card with a connection for a high-

density (HD) 68-pin cable.

Accessories 0

The following accessories are shipped with the Quantum

SuperLoader 3 autoloader:

• Quantum SuperLoader 3 Quick Start Guide

•SCSI host cable

• SCSI terminator

• Hardware to rack mount the autoloader

•TORX

L-Key drivers (T8 and T10)

•One magazine blank

• Power cable

• Documentation CD containing all of the documentation

in Adobe

Portable Document Format (PDF)

• Bar code labels

OTE: The autoloader is not compatible with a

High-voltage Differential (HVD) SCSI bus.

OTE: If you use a single-ended (SE) SCSI bus, the tape

drive’s performance is limited to the maximum data

transfer speed of the bus.

The maximum number of autoloaders supported per

SCSI bus is two.

The autoloader may not work with multiple SCSI

LUNS when attached to a RAID controller. The

autoloader is not recommended for use with a RAID

controller. If this problem occurs, it is recommended

that the autoloader be attached to a separate SCSI

bus controller on the host or server.

Choosing a Location 0

The autoloader is designed to fit in a standard 19-inch rack

using either the long or short brackets (depending on the

depth of the rack), or the optional rail kit. Choose a location

that meets the following criteria. The autoloader uses

standard rack mounting hardware.

Table 1 Location Criteria

UL Requirements 0

Elevated Operating Ambient

Tem p er at ur e

When installed in a closed multi-unit rack assembly, the

operating ambient temperature of the rack environment

may be greater than the room ambient. Therefore,

consideration should be given to installing the equipment in

Criteria Description

Rack

requirements

Standard 19-inch rack with 2U of

clearance.

Room

temperature

10–35° C (50–95° F)

Power source AC power voltage: 100–127 VAC; 200–

240 VAC

Line frequency: 50–60 Hz

NOTE: Locate the AC outlet near the

autoloader. The AC power cable is the

product’s main disconnect device and

must be easily accessible at all times.

Weight 14.1 kg (31 lb.) unloaded

17.2 kg (38 lb.) loaded with 2

magazines, 16 cartridges

Air Quality Minimize sources of particulate

contamination. Avoid areas near

frequently used doors and walkways,

cooling or exhaust vents, stacks of

supplies that collect dust, printers, and

smoke-filled rooms.

AUTION: Excessive dust and debris can

damage tapes and tape drives.

Humidity 20–80% RH (non-condensing)

Clearance Back: Minimum of 43.2 cm (17 in.)

Front: Minimum of 68.6 cm (27 in.)

Sides: Minimum of 5.08 cm (2 in.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Maxdata Quantum SuperLoader 3 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Maxdata Quantum SuperLoader 3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info