GB
Instructions for use
3.2 Using a 3-point safety belt (blue marking on product) and support leg
If your car is not equipped with Isofix anchor points, you can install the EasyFix using a 3-point safety belt
in combination with the support leg. To check whether your car is suitable for installation using a 3-point
safety belt and support leg, see Section 9: Car fitting list.
* Provided there is a 3-point safety belt in the middle position of the back seat and there is enough room
for properly installing the support leg (see Section 9: Car fitting list).
Only install the EasyFix on a forward-facing seat fitted with an automatic 3-point safety belt approved in
accordance with ECE R16 or equivalent standard.
The proper threading of the seat belt is essential to your child’s safety. The seat belt must be threaded
along the blue markings on the EasyFix. See the sticker outlined in blue on the topside of the EasyFix.
Never thread the belt in any other way!
13
• Installation with 3-point safety belt Yes
• Installation with 2-point safety belt No
• On passenger seat Yes
• On left/right side of back seat Yes
• In middle position of back seat Yes*
• Belt routing marking Blue
• Frontal airbag No
• Side airbag Yes
