Bedienungsanleitung Maxi-Cosi Mura (Seite 4 von 58) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

450902

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

4 PREPARING THE MAXI-COSI

MURA FOR USE / UNFOLDING

AND FOLDING / DISASSEMBLING

Please note: the left and right sides are as seen from the

handlebar/back

4.1 Preparing the pushchair for use

Fitting the wheels

1. Press on the centre of the hubcap and insert the axle of

the rear wheels into the frame until you hear it ‘click’

(Fig. 1).

Insert the front wheels into the front fork until you

hear them ‘click’ (Fig. 2).

3. Check that the wheels are correctly secured.

Unfolding the frame

1. Place the frame upright.

2. Push the transport hook near the right rear leg aside

(Fig. 3).

3. Pull the handlebar toward you and then upward (Fig. 3).

The frame will unfold and the handlebar will click into

the locking device (Fig. 4).

Adjusting the handlebar height

- Press the adjustment button and slide the handlebar to

the desired height. With a ‘click’ the handlebar is fixed in

position (Fig. 5).

Parking brake

- Note: always use the parking brake, even when standing

still for only a few moments!

1. Press the red surface of the pedal down to set the

parking brake on your Maxi-Cosi Mura (Fig. 6).

2. Put your foot under the pedal and press it up to release

the parking brake on the Maxi-Cosi Mura.

Adapters

The adapters are marked on the inside with an A (right) and

B (left).

1. Slide the adapters onto the frame until you hear a ‘click’

(Fig. 7).

2. Check that both adaptors are secure.

3. When using the prambody: fold the hinging parts of

the adapters down (Fig. 8). For further use see the

instructions for the prambody.

4. When using a Maxi-Cosi baby car seat: fold the hinging

parts of the adapters up (Fig. 9). For further instructions

see the Maxi-Cosi baby car seat instruction manual.

5. Remove the adapters by pushing the lip inward (toward

the middle of the pushchair). Then slide the adaptors off

the frame (Fig. 10).

Seat

- Note: The Maxi-Cosi Mura is suitable for children from

birth to 15 kg (corresponding to 3.5 years on average).

We recommend that the seat of the Maxi-Cosi Mura

is only used after your child has reached the age of 6

months and is able to sit unassisted. Always secure your

child with the safety harness. The Maxi-Cosi Mura seat

is not suitable for use in a car.

Preparing the seat for use

1. Fold up the leg rest and attach the fabric cover (Fig. 11).

2. Press the buttons on both sides to fold down the leg rest.

The seat can be used in two positions.

- Note: never allow your child to stand or sit on the footrest.

3. Put the back rest in the upright position using the

positioning handle (Fig 12).

- Note: never hang bags or other products behind or on

the positioning handle and never clamp objects between

the back rest and the handle.

4. Remove the protective cap from the crotch strap by

pulling the click tab forward and then pushing it upward

(Fig 13). Push the T-bar into the seat until you hear it

click.

5. Attach the elastic to the bottom (Fig. 14).

To remove: loosen the elastic on the bottom. Push in the

button on the front and pull the T-bar upward. Replace the

protective cap.

Fitting the seat and adjusting the sitting angle

- Note: the seat can only be fitted when the adapters have

been removed.

1. Place the seat on the frame with a ‘click’. (Fig. 15).

2. Check to make sure everything is secure.

3. Pull the back rest positioning handle up and tilt the

back rest into the required position (Fig. 16).

The seat can be adjusted to 3 positions: a sitting posi-

tion, a semi-reclining position and a reclining position.

Turning the seat around

1. Pull the release handle on the Maxi-Cosi Mura seat

back wards and remove the seat (Fig. 17).

- Note: do not lift the Maxi-Cosi Mura up with the T-bar.

2. Turn the seat around and place it in the frame until it

‘clicks’ (Fig 18).

3. Check to make sure everything is secure.

There are D-rings for attaching an additional safety

harness. The standard for this type of harness is BS 6684.

English

EXI0277_Mura_4_I_BW.indd 9EXI0277_Mura_4_I_BW.indd 9 21-07-09 12:0821-07-09 12:08

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Maxi-Cosi Mura Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info