as necessary. Set the spark plug gap at 0.6 mm. The
LJQLWLRQWLPLQJLV¿[HGDQGQRQDGMXVWDEOH
1. Twist, then pull off the spark plug boot.
2. 5HPRYHWKHVSDUNSOXJIURPWKHF\OLQGHUDQG
discard.
3. 5HSODFHZLWK&KDPSLRQ5=&VSDUNSOXJDQG
tighten securely with a 16 mm socket wrench.
4. 5HLQVWDOOWKHVSDUNSOXJERRW
SERVICE AND ADJUSTMENTS
REPLACING THE TRIMMER LINE
1. Press the tabs on the side of the trimmer head and
remove the cover and spool.
2. 5HPRYHDQ\UHPDLQLQJWULPPHUOLQH
3. &OHDQGLUWDQGGHEULVIURPDOOSDUWV5HSODFHWKH
spool if it is worn or damaged.
4. 5HSODFHZLWKDSUHZRXQGVSRRORUUHSODFH
the trimmer line using a 4 metres length of the
VSHFL¿HGWULPPHUOLQH
5. When installing new trimmer line on an existing
spool, hold the spool as shown.
6. Bend the line at the midpoint and insert the bend
into the slot in the center rim of the spool. Ensure
the trimmer line snaps into position in the slot.
7.
Slot
:LWK\RXU¿QJHUEHWZHHQWKHWULPPHUOLQHVZUDS
WKHWULPPHUOLQHVHYHQO\DQG¿UPO\DURXQGWKH
spool in a clockwise direction.
8.
Position the trimmer lines in the guide slots.
9. Place the spool in the cover as shown.