Bedienungsanleitung McCulloch CABRIO 341 (Seite 9 von 13) (Englisch)

590533

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

This product must be held to the right of the

operator’s body.

This will ensure exhaust fumes are directed away

from the operator and will not be obstructed by

the operator’s clothing. If you have not used a

trimmer before, spend some time in becoming

familiar with the controls and method of usage

before operation.

Check the machine carefully before using it.

Make sure that there are no loosened screws,

damaged parts or fuel leakages.

Replace damaged or excessively worn

accessories (blades, string heads, guards).

Ensure all maintenance or repair work is carried

out by an authorised service center.

N.B. In order to maintain performance and safety,

be sure to use original spare parts and

accessories.

Avoid using the trimmer over excessively long

periods of time.

Excessive amounts of vibration can be harmful.

1) Remove from the working area grit, debris,

ropes, metal parts or any other object which

might get entangled around the rotating parts

or be dangerously projected.

Use only the correct accessory recommended

for the type of vegetation to be cut. Do not let

the rotating blade contact any foreign object

such as stones, rocks, cans etc.

Secure hair to keep it above shoulder height.

Before starting to work fit the harness. Adjust

harness with the buckle so that the trimmer is

well balanced on your right side and the blade

or string head is parallel to the ground. Always

maintain a firm foothold and a good balance

while using the machine. Do not move

backwards while you work as obstacles may

not be visible.

The fitting of the safety pole barrier is

obligatory on units equipped with a delta

shaped handle when used with a metal blade.

The purpose of this safety pole barrier is to

maintain a safe distance between the metal

blade and the user under all normal or

exceptional circumstances.

2) Harness ring (B) must never be moved from its

original position to avoid unbalancing the unit.

Front handles can be separately adjusted to

make usage easier on units fitted with “U”

shaped handles.

3) The following accessories can be assembled to

your trimmer: a) blade, b) nylon string head.

Do not attach any blade to a unit without

proper installation of all required parts. Failure

to use the proper parts can cause the blade to

fly off and seriously injure the operator and/or

bystanders.

a) WHEN USING A BLADE ENSURE THE

CORRECT GUARD IS FITTED.

b) WHEN USING A NYLON STRING HEAD

ENSURE THE CORRECT GUARD IS FITTED.

When using the unit always hold the front part

of the machine (blade or nylon string head)

below your waist.

NYLON STRING HEAD:

Always make sure it has been correctly

assembled and fitted.

The nylon head is suitable to cut grass and

weeds wherever there might be obstacles like

trees, fences or walls.

The nylon string head also reduces the

likelihood of damaging small plants and trees

bark.

Only use flexible, nonfilament nylon line in the

nylon line head as specified by the

manufacturer. Never use metallic line which

could break off and become a dangerous

projectile.

BLADE:

Always make sure it has been correctly fitted.

When fitting or changing a cutting device,

ensure you follow the instructions in the

section “Blade or nylon string head assembly”

with extreme precision. Fit these cutting

devices using all and only the parts as

described, and in the correct order.

4) BLADES: you can cut any type of grass,

brushwood or shrub.

Operate the machine like a sickle always

cutting at full throttle.

5) WARNING: always use a well sharpened blade.

A blade with worn teeth besides providing

poor performance might also generate a

sudden thrust. This can result in a violent

sideways kick caused when the blade touches

against wood or solid bodies, such thrust

might then cause the operator to loose control

of the machine itself. Never attempt to work

with a damaged blade but replace it with a

new one.

THRUST: can occur when using any type of

circular blade within the risk area: therefore it

is advisable to cut using the remaining area of

the blade.

CIRCULAR SAW BLADE: it can be used to cut

sappling, small trees with a diameter up to 7

cm., to clean shrubs.

WARNING: IF A METAL 24-80 TOOTH BLADE

IS USED (A TOOTH SAW BLADE) A DOUBLE

SHOULDER HARNESS AND A SAFETY

C. SAFETY USAGE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

McCulloch CABRIO 341 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von McCulloch CABRIO 341

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info