Bedienungsanleitung McCulloch CS42STE (Seite 13 von 532) (Alle Sprachen)

684234

Zoom out

Zoom in

Vorherige Seite

1/532

Nächste Seite

IMPORTANT POINTS

• :RUNVORZO\NHHSLQJERWKKDQGV¿UPO\JULSSHGRQ

the saw. Maintain secure footing and balance.

• Watch out for springpoles. Springpoles are small

size limbs which can catch the saw chain and

whip toward you or pull you off balance. Use

extreme caution when cutting small size limbs or

slender material.

• Be alert for springback. Watch out for branches

that are bent or under pressure. Avoid being

struck by the branch or the saw when the tension

LQWKHZRRG¿EHUVLVUHOHDVHG

• Keep a clear work area. Frequently clear

branches out of the way to avoid tripping over

them.

LIMBING

Always limb a tree after it is cut down. Only then can

limbing be done safely and properly.

Leave the larger limbs underneath the felled tree to

support the tree as you work.

Start at the base of the felled tree and work toward the

top, cutting branches and limbs. Remove small limbs

with one cut.

Keep the tree between you and the chain. Cut from

the side of the tree opposite the branch you are

cutting.

Remove larger, supporting branches with the cutting

techniques described in BUCKING WITHOUT A

SUPPORT.

Always use an overcut to cut small and freely hanging

limbs. Undercutting could cause limbs to fall and pinch

the saw.

PRUNING

a WARNING! Limit pruning to limbs shoulder

height or below. Do not cut if branches

are higher than your shoulder. Get a

professional to do the job.

1. 0DNHWKH¿UVWFXWRQHWKLUGRIWKHZD\WKURXJKWKH

bottom of the limb.

2. Make the second cut all the way through the limb.

3. Make the third overcut leaving a 2.5 to 5

FHQWLPHWHUWRLQFKFROODUIURPWKHWUXQNRIWKH

tree.

MAINTENANCE

a WARNING: Disconnect the spark plug

before performing maintenance except for

carburettor adjustments.

We recommend all service and adjustments

not listed in this manual be performed by an

authorized or Master Service Dealer.

GENERAL RECOMMENDATIONS

The warranty on this unit does not cover items that

have been subjected to operator abuse or negligence.

To receive full value from the warranty, the operator

must maintain the unit as instructed in this manual.

Various adjustments will need to be made periodically

to properly maintain your unit.

IMPORTANT: Have all repairs other than the

recommended maintenance described in the

instruction manual performed by an authorized

service dealer.

If any dealer other than an authorized service

dealer performs work on the product, the company

may not pay for repairs under warranty. It is your

responsibility to maintain and perform general

maintenance.

MAINTENANCE SCHEDULE

Before each use

• Check fuel mixture level

• Check bar lubrication

• Check chain tension

• Check chain sharpness

• Check for damaged parts

• Check for loose caps

• Check for loose fasteners

• Check for loose parts

Every 5 hours*

• ,QVSHFWDQGFOHDQDLU¿OWHU

• Inspect and clean chain brake

• Inspect and clean guide bar

Every 25 hours*

• ,QVSHFWDQGFOHDQVSDUNDUUHVWLQJVFUHHQDQGPXIÀHU

Yearly

• Replace spark plug

• 5HSODFHIXHO¿OWHU

• 5HSODFHDLU¿OWHU

* Each hour of operation is approximately 2 tanks of

fuel.

131313

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

McCulloch CS42STE Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info