Bedienungsanleitung McCulloch ES2014 (Seite 6 von 15) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

478448

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

ENGLISH – 3

reference number of the corresponding component to

draw the reader’s attention to the main safety

procedure linked with that particular situation; the

machine parts shown in “A – GENERAL

DESCRIPTION” are indicated in italics in the text for

easy identification.

Precautions prior to machine use. Never permit

this machine to be used by any persons who are not

perfectly familiar with the manual instructions, who

are not in good physical and mental condition, who

are not sufficiently competent and by children (local

regulations may sometimes limit the age of operators

permitted to use the machine). Inexperienced

persons must follow a training period operating on a

saw horse only. The user is responsible for any

accidents that may cause injury to other persons and

damage to property, as well as any other type of

danger risk. The machine must never be used for

operations other than those specifically described in

this manual, and exclusively with the bars and chains

indicated. This machine must never be used when

users are tired, or not in good physical condition, or if

under the effect of any substance that may alter their

physical or mental condition (pharmaceuticals,

alcohol, drugs etc.) Make certain that the user knows

how to stop the motor and chain in case of necessity.

Take great care and pay close attention at all times

when using this machine, following all general

behaviour rules according to good sense.

1. Control checks. Control the machine with care

before use each time, especially if it has been subject

to strong impact, or if it shows any signs of

malfunction. Check that the machine has been

assembled correctly, that all components are in

correct condition and perfectly clean. Perform all

operations described in the chapter “Maintenance –

before each use”. Make sure that all spanners and

tools used for adjustment operations have been

removed, that all screws and nuts are in their correct

housing and tightened correctly, and that the bar and

the chain are mounted correctly. If even one single

condition described above is not satisfactory DO NOT

USE the machine.

2. Repairs and Maintenance. All the machine parts

that can be replaced personally, are clearly explained

in the “Assembly / disassembly” instructions chapter.

In the case of damaged or worn components, always

use exclusively original homologated accessories and

spare parts that are available from official distributors.

Where necessary, all other machine parts must be

replaced exclusively by an Authorised Service

Centre. All danger risks increase considerably if

maintenance operations are not performed regularly,

not performed by competent professional personnel,

or if non-original accessories /spare parts are

mounted on the machine. In any of the cases

described above, the manufacturer will not be held

responsible for any injury to persons or damage to

property. In the case of any doubt, please contact an

Authorised Service Centre.

3. Maintenance in complete safety. All

maintenance, assembly, disassembly and oil tank

filling operations must be performed with the machine

set in a stable position on a flat solid surface and with

the cable plug disconnected from the electricity

supply (unless this is explicitly specified otherwise).

The chain must be arrested and the user must wear

suitable protective gloves.

4. Clothing. When using this machine the user must

wear the following homologated individual protective

clothing : close-fitting protective clothing, safety boots

with non-slip soles, crush-proof toe puffs and cut-

proof protection; cut-proof vibration-proof gloves,

protective goggles or safety visor (remove protective

film where present); ear protection muffs; helmet (if

there is any danger of falling objects); some efficient

method to cover or tie hair back from shoulder length

(if hair is longer than shoulders); dust-proof mask. DO

NOT WEAR shorts, loose clothing, unbuttoned

clothing, or any jewellery that could become caught in

moving machine parts. Do not wear sandals and

never work bare-footed.

5. Health precautions – Vibrations and Noise

levels. Avoid using the machine for long periods of

time: the noise and vibrations can be dangerous

causing irritation, stress, fatigue and hypacusia

(hearing problems). Prolonged machine use exposes

the user to vibrations that can generate “white finger

phenomenon” (Raynaud’s Phenomenon), carpal

tunnel syndrome and similar disturbances. This can

lead to a lack of sensitivity in the hands making it

difficult to notice changes in temperature as well as

causing numbness. When using the machine

regularly or in continuation, the user must control the

condition of his hands very carefully. If any of the

symptoms described above appear, consult a doctor

immediately.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

McCulloch ES2014 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info