Bedienungsanleitung McCulloch PROMAC 46 II 46 CC (Seite 4 von 9) (Englisch)

478419

Zoom out

Zoom in

Vorherige Seite

1/9

Nächste Seite

ENGLISH - 2

Choke partially opened

Choke closed (cold start)

Stopping

Brake engaged / disengaged

Beware of kickback

Do not cut with the end on the bar,

this may cause kickback

Never use the machine with only one

hand

Always use the machine with both

hands

Switch off the engine by moving the

stop switch to the STOP position

before carrying out any checks

or maintenance.

Oil/petrol mix

Safety precautions

1 All operators should read this manual carefully before

using this chainsaw; only use this machine for usage

specifically mentioned in this manual.

Wear suitable clothing. This should include snugly-fitting

(safety) clothing, sturdy boots, heavy duty gloves, goggles

or a face screen and ear plugs or ear mufflers. Wear a hel-

met if there is risk of falling objects or projections from trees.

2 Always hold the chainsaw firmly with both hands when

the engine is running. Always maintain a firm foothold.

Ensure you are able to stop the engine quickly if neces-

sary.Do not work up a tree unless you have received suit-

able training and have the appropriate equipment (belts,

ropes, safety hooks etc.) for this type of work.

We strongly recommend that all first-time chainsaw users

obtain practical instruction on safe chainsaw usage

before operating the chainsaw.

Do not operate this machine when tired or under the influ-

ence of any substances, drugs or alcohol which can

impair vision, dexterity or judgement.

Prolonged use of chainsaws or other machines exposing

the operator to vibration may produce Whitefinger’s

Disease (Raynaud’s Phenomenon). This may reduce the

hands’ ability to feel and regulate temperature and may

produce general numbness. Continual or regular users

should therefore monitor closely the condition of their

hands or fingers. If any of the symptoms appear, seek

immediate medical advice.

3 Never carry the chainsaw with the engine running.

Whenever carrying a chainsaw, even for short distances,

the chain should be covered by the chain guard (scab-

bard) and the bar should point backwards.

When transporting the chainsaw in a vehicle, secure the

saw to prevent fuel spillage.

4 To avoid kick-back, do not attempt to cut with the nose of

the bar. Ensure the engine is running at full throttle before

commencing to cut. To avoid kick-back, do not let the nose

of the bar come into contact with logs, branches, the

ground or any other obstruction. Do not allow any part of

the chain to come into contact with rock, nails or wire fence

Ensure the chain is kept sharp and correctly tensioned.

Keep the spike or the saw body against the wood when

cutting. Use only genuine accessories and spare parts.

We recommend you have your unit periodically checked

and serviced by an authorised dealer.

Do not use chainsaw above shoulder height.

5 Do not operate the chainsaw near a naked flame or

spilled fuel. Only operate the chainsaw outside and in

well ventilated areas.

After re-fuelling, always wipe off any spilled fuel. Move

the chainsaw away from the fuelling point before

starting the engine.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

McCulloch PROMAC 46 II 46 CC Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info