Bedienungsanleitung MCZ AKI HYDROMATIC 24 M1 (Seite 8 von 48) (Englisch)

812476

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

1-WARNINGS AND WARRANTY CONDITIONS

• If a “verication” mode is provided in the menu, set this function during the readings to ensure that no temperature modulation

occurs due to an incorrect setting of the operating parameters.

• Lastly, strictly comply with the sampling points specied in the regulations in terms of emissions as well as temperature

WARRANTY CONDITIONS

The rm covers the product,with the exception of the parts prone to normal wear that are listed below, for a period of 2 (two)

years from the date of purchase as proved by:

• a document to serve as proof of purchase (invoice and/or receipt) that shows the name of the vendor and the date on which the

purchase was made;

• forwarding of the completed warranty certicate within 8 days of purchase.

Furthermore, in order for the warranty to be valid, the device must be installed and calibrated by qualied personnel, and where necessary,

the user must be issued with a declaration of conformity and correct product operation.

We recommend performing a functional test of the product before completion with the relative nishes, if applicable (claddings, painting

of walls, etc.).

Installations that do not meet the current standards, improper use and lack of maintenance as required by the manufacturer, void the

product warranty.

The warranty is valid on the condition that the instructions and warnings contained in the user and maintenance manual are observed,

and therefore the product is used correctly.

Replacement of the entire system or repair of one of its components does not extend the warranty period, and the original expiry date

remains unchanged.

The warranty covers the replacement or free repair of parts recognised as being faulty at source due to manufacturing defects.

In the event of a fault, to benet from the warranty, the customer must keep the warranty certicate and provide it along with the

document given at the time of purchase to the Technical Service Centre.

EXCLUSIONS

The warranty does not cover malfunctions and/or damage to the appliance that arise due to the following causes:

• Damage caused during transport and/or handling

• all parts that develop faults due to negligence or improper use, incorrect maintenance, installation that does not comply with the

manufacturer’s instructions (always refer to the installation guide provided with the appliance)

• incorrect sizing with regard to the use or faults in the installation or failure to implement the necessary measures to ensure proper

execution

• improper overheating of the equipment, i.e. the use of fuels not conforming to the types and quantities indicated in the provided

instructions

• further damage caused by incorrect user operations in an attempt to x the initial fault

• worsening of the damage caused by the user continuing to operate the appliance even after the fault has been detected

• in the presence of a boiler, any corrosion, deposits or breakage caused by water ow, condensation, hardness or acidity of the water,

improperly performed descaling treatments, water outage, mud or limescale deposits

• ineciency of chimneys, ues or parts of the system aecting the appliance

• damage due to appliance tampering, weathering, natural disasters, acts of vandalism, electrical discharges, re, defects of the

electrical and/or hydraulic system.

• Failure to have yearly stove maintenance performed by an authorised technician or qualied personnel shall render the warranty

void.

The following are also excluded from this warranty:

• parts subject to normal wear such as gaskets, glass, cladding and cast iron grilles, painted, chrome-plated or gilded parts, handles

and electric cables, bulbs, indicator lights, knobs, all parts which can be removed from the rebox.

• Variations in colour of the painted or ceramic/serpentine parts and crazed ceramics as they are natural characteristics of the material

and product use.

• masonry work

• system parts (if included) not supplied by the manufacturer

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MCZ AKI HYDROMATIC 24 M1 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von MCZ AKI HYDROMATIC 24 M1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info