Bedienungsanleitung MCZ Curve COMFORT AIR (Seite 10 von 40) (Englisch)

643573

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

TIMER

6:30

8:00

OFF

°C

TIMER

ECO

OFF ON

11-REMOTE CONTROL MAX

TIMER settings

TIMER time slot display

In TIMER mode, to display the time slots simply press key D for 2”. With key C one can scroll the 6 time slots freely, quickly checking the

saved settings (gure 8). By pressing key D or A one goes back to the basic display.

Modifying the TIMER time slots

To modify a time slot, display it as described in the previous paragraph and then press key E. The rst parameter to be set will start to ash,

i.e. room temperature. Press key C to modify the value and key E to conrm and set the next parameter. The parameters of a time slot can

be set in the following sequence:

• Room temperature. Can be set between 5° and 35°C. 2 dashes “--” appear if set below 5°C or above 35°C, and if this is conrmed, the

programme is disabled(therefore, the product will not be switched on).

• Switch-on time. The value is adjusted in 10 minute intervals (from 00:00 to 23:50)

• Switch-o time. The value is adjusted in 10 minute intervals (from 00:10:00 to 24:00).

• Days of the week in which the programme is active. Monday (MO) will start to ash, followed by the other days of the week. Use key

C to activate/disable the day. The activated days will be displayed on a dark background. When the Sunday (SU) setting is complete,

press key E to exit the editing page and return to the time slots display.

By pressing key D at any time one exits the time slot editing mode, saving all variations conrmed with key E up to that time, and one

goes back to the time slot display condition.

While by pressing key A (or leaving the keypad idle for 30”) one goes directly to the basic display, saving all variations conrmed with key

E up to that time.

Activating the TIMER-ECO time slots

In ECO mode one can activate up to 6 time slots, customising switch-on and switch-o (E1 – E6): by pressing key D for 2” the TIMER

activation/disabling function will appear (gura 9). If the ON option is conrmed one can display/modify the 6 time slots of the TIMER-

ECO with the same procedure described previously for the TIMER. By conrming the OFF option, the TIMER is disabled and the product goes

back to operate in ECO mode without active time slots.

REMOTE CONTROL SYNCHRONIZATION

When the product is started up for the rst time, it may be necessary to synchronize the new remote control with the stove. To do this,

follow these simple instructions:

• connect the socket to the stove and turn on the power switch

• make sure the selector D on the emergency panel is in the REMOTE position

• when the rst message appears on the emergency panel’s display, use a pointed object to press the chased G button (toothpick, etc.)

• the panel’s display will show 3 ashing lines “---“. Press the remote control’s on/o button to launch the learning process.

The three ashing lines will disappear from the display and the stove will learn the remote control’s new communication address.

The learning process is also conrmed by an audio signal.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MCZ Curve COMFORT AIR Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von MCZ Curve COMFORT AIR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info