632413
40
Zoom out
Zoom in
Vorherige Seite
1/57
Nächste Seite
PELLET STOVES Chapter 5
INSTALLATION AND USE MANUAL
page 40
Menu structure Technical service - Rights reserved MCZ GROUP S.p.A. - Reproduction prohibited
1. Press the button on the top right “D” of the display to access
the menu
2. Using the two lower keys “F” and “C” scroll through the various
menus until you reach the SETTINGS menu.
3. Press button "D" corresponding to the word SET.
4. Using the two lower keys “F” and “C” scroll through the various
menus until you reach the PELLET RECIPE menu.
5. Confirm by pressing the button "D" in correspondence to SET.
6. Change the value using lower keys “F” and“C” corresponding
to symbols + and
7. Confirm by pressing the button "D" in correspondence to key
OK.
The available values are:
- 3 = 30% decrease in pellets at all powers.
- 2 = 20% decrease in pellets at all powers.
- 1 = 10% decrease in pellets at all powers.
0 = no variation
1 = 5% increase in pellets at all powers.
2 = 10% increase in pellets at all powers.
3 = 15% increase in pellets at all powers.
5.4.5. Changing the smoke exhaust fan speed –
Var.% smoke rpm
In the installation proves difficult for smoke discharge (lack of draught
or even pressure in the conduit), it is possible to increase the smoke
and ash exhaust speed. Such modification is also the best way to solve
all potential problems of pellet blockages in the grate and sediments on
the bottom of the grate which are created by bad quality fuel or which
release a lot of ash.
1. Press the button on the top right “D” of the display to access
the menu
2. Using the two lower keys “F” and “C” scroll through the various
menus until you reach the SETTINGS menu.
3. Press button "D" corresponding to the word SET.
4. Using the two lower keys “F and "C" scroll through the various
menus until you reach VAR. SMOKE RPM.
5. Confirm by pressing the button "D" in correspondence to SET.
6. Change the value using lower keys “F” and“C” corresponding
to symbols + and
7. Confirm by pressing the button "D" in correspondence to key
OK.
The available values range from -30% to +50% with variations of 10
percentage points at the time.
Downloaded from www.Manualslib.com manuals search engine
40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für MCZ FACE Air wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von MCZ FACE Air

MCZ FACE Air Bedienungsanleitung und Installationsanweisung - Holländisch - 58 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info