Bedienungsanleitung MCZ MAESTRO - CONTROL PANEL (Seite 28 von 68) (Englisch, Holländisch, Dänisch)

694194

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

WARNINGS

• The panel must be installed and connected to the motherboard only with electric power DISCONNECTED. The manufacturer will not

be held liable for any malfunctioning in case of damage resulting from failure to comply with this indication.

• Only power on the appliance when the connection to the panel and motherboard is nished

• The connection cable MUST always pass through zones not in contact with the direct heat of the stove or of the combustion chamber.

• Follow the intended passage points for wiring as indicated in this instruction manual

• The connection cable MUST NEVER be more than 2 m long. Any extensions can lead to malfunctioning and loss of communication,

thus entailing anomalous behaviour of the appliance. In this case, the manufacturer disclaims liability for any anomalies, incorrect or

abnormal behaviour of the appliance and damage to the same or to the user.

INFORMATION

• The control panel is a further control interface for the stove and works IN CONJUNCTION with the APPS used from Smartphones,

with the MCZ remote control and with the emergency panel on the stove. This means that the commands set from the APP are also

displayed on the panel and vice versa.

• It takes the display 15 seconds to refresh (time required for the display to get the information from the motherboard memory) for

basic commands (power and ventilation) and 3 seconds for operating information (INFO screen). This means that when a command

is given from the APP on the smartphone, there will be a slight delay (max 10 seconds) for it to appear considering the required

times above.

• The optional MAESTRO panel does NOT have an internal probe. Temperature regulations are carried out based on the local probe of

the stove, on the WI-FI probe (optional) and on an external thermostat.

• All optional MCZ control panels are compatible with MAESTRO appliances. The various models have dierent assembly supports but

the same internal electronics. The following models are available:

• LIFT: Control panel equipped with push-pull extraction system to be installed on the back of the stove

• LIFT for ROUND stoves: controls equipped with push-pull extraction system to be installed on the back of a round shaped

stove (see HALO, MOOD, etc..)

• RECESSED: Control panel equipped with a wall or plasterboard recessed box to insert the panel in a wall (ideal for MAESTRO

pellet inserts)

• WALL MOUNTED: Control panel equipped with support to be xed to the wall to install the panel near the appliance without

performing masonry work. Also ideal for products which due to their aesthetic features (for example products completely

lined in ceramic like CURVE), the LIFT model control panel cannot be mounted on them

2 GENERAL INFORMATION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MCZ MAESTRO - CONTROL PANEL Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von MCZ MAESTRO - CONTROL PANEL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info