Bedienungsanleitung MCZ MUSA Hydromatic 24 M2 (Seite 55 von 68) (Englisch)

812516

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

26-RECOMMENDATIONS FOR SAFE USE

RECOMMENDATIONS FOR A SAFE USE

ONLY A SUITABLE INSTALLATION ACCORDING TO THE UK BUILDING REGULATIONS (ADJ) AND A PROPER MAINTAINANCE

AND CLEANING OF THE PRODUCT CAN ASSURE YOU THE CORRECT FUNCTIONALITY AND A SAFE USE OF YOUR STOVE (ONLY

FOR UK).

We wish to notify you that we have been made aware of incidents involving domestic heating pellet stoves resulting from the stoves

having been incorrectly installed or inadequately maintained. In some cases the incident provoked an explosion that caused the glass

door on the stoves to shatter.

We would like to assure you that all of our products are very safe and are certied to the required European standards. The ignition

system has been tested carefully to increase the lighting eciency and avoid any trouble even in the worst working condition. Moreover

our structures are also provided with a safety device studied to discharge the eventual overpressure in combustion chamber, and avoid

any damage to the product and consequent risk for the nal user. However, like any stove, our stoves need to be properly installed and

maintained if they are to work safely.

Our studies suggest that these explosions are mainly caused by a combination of some or all of the following factors:

• Clogged brazier holes or a deformed brazier, resulting from insucient maintenance, creating the conditions for a delayed ignition

causing a build up of unburnt gases

• Insucient combustion air due to the stove not having a big enough air inlet or not having an air inlet at all

• The use of smoke connections or ue pipe assembly which don’t comply with UK regulations and which don’t create the draught

required to eectively suck the smoke outside (e.g. too many bends in the ue).

• Partially blocked ue pipes, which indicates poor maintenance, reducing the draw on the chimney making ignition dicult.

• The chimney terminal not complying with our installation instructions and failing to prevent potentially dangerous down-draught.

This component becomes essential when the stove is installed in windy areas like coastal zones.

Any of the above factors or any combination of them could generate unburnt gasses which in the worst cases could explosively ignite

when there becomes enough oxygen present.

To avoid this rare but not impossible inconvenient, rst of all the installation shall be done in compliance with UK building regulations and

the suggestions described in this manual.

Furthermore it’s absolutely important to respect the following simple rules:

• The brazier shall be always layed down in its proper position before any use of the product, removing completely the dirt if present

in the base plate

• Pellets must not be fed manually into the brazier, both before ignition and during the working condition.

• Eventual accumulated unburnt pellets in the burner after a failed ignitions must be removed before lighting

• If a failed ignition aects the product repeatedly, despite a clean brazier and a usual fuel loading, we recommend that you

immediately stop using the stove and contact a qualied technician to check the stove functionality.

The respect of these suggestions is absolutely enough to guarantee a safe ignition and to avoid any inconvenient to the product.

If the above precautions are not fullled, and the ignition shows an abnormal amount of pellet in the brazier and a consequent heavy

generation of unburned gas in the combustion chamber, respect carefully the following suggestions:

• Do not switch o the electrical power from the stove for any reason: this would arrest the gas exhaust blower with a consequent

spread of smoke into the room.

• Precautionally open the windows to ventilate the installation room from eventual smoke outlet in ambient (the ue gas outlet could

work not properly).

• Do not open the re door: this would aect the regular smoke evacuation from the chimney.

• Simply switch o the stove by pressing the on/o button in the control panel (not the rear button of power supply!), and wait till the

smoke has been evacuated completely.

• Before any re-lighting attempt, clean completely the brazier and its air passages from any dirt and unburned pellet; put it in the

proper position removing the dirt eventually present in the base plate. If a repeated failed ignition happens, stop using the stove and

contact a qualied technician to check the stove and chimney functionality

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MCZ MUSA Hydromatic 24 M2 Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von MCZ MUSA Hydromatic 24 M2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info