Bedienungsanleitung MCZ TEIA COMFORT AIR 10 S2 (Seite 12 von 36) (Englisch)

812468

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

15-MENU ITEMS AND OPERATION

j - Components test

This can be done only when the stove is o and allows you to select the components to be tested:

• Spark plug: it is turned on for a xed period of 1 minute during which the panel displays the countdown in seconds.

• Feed screw: it is powered for a xed period of 1 minute during which the panel displays the countdown in seconds.

• Extractor: it is activated at 2500 rpm for a xed period of 1 minute during which the panel displays the countdown in seconds.

• Exchanger: enables you to conduct the test in V5 for a xed period of 1 minute during which the panel displays the countdown in

seconds.

Enable the “Component test” function (only with stove o) as follows:

• Press the “menu” key.

• Use the arrow keys to scroll through and select “Settings”

• Press “menu” to conrm.

• Use the arrow keys to scroll through and select ‘’Component test’’

• Press “menu” to conrm.

• Use the + - keys to select the test to be carried out.

• Press ‘’menu’’ to conrm and ‘’esc’’ to exit.

k - Chimney sweeper function (for maintenance operators only) -

This function can only be activated when the stove is on and power is supplied, and it forces operation of the boiler at the parameters

P5, with the ventilator (if present) in V5. Any corrections to the loading/smoke ventilation percentage must be read. This state lasts 20

minutes, the countdown is displayed on the panel.

The technician can stop this phase at any moment by quickly pressing the on/o key.

Enable the “Chimney sweeper” function as follows:

• Press the “menu” key.

• Use the arrow keys to scroll through and select “Settings”

• Press “menu” to conrm.

• Use the arrow keys to scroll through and select ‘’Chimney sweeper function’’

• Press “menu” to conrm.

• Use the + - keys to select “On” (O by default)

• Press ‘’menu’’ to conrm and ‘’esc’’ to exit.

l - Technical menu

To access the technical menu you must contact the service centre as it requires a password.

Access the “technical menu” as follows:

• Press the “menu” key.

• Use the arrow keys to scroll through and select “Settings”

• Press “menu” to conrm.

• Use the arrow keys to scroll through and select ‘’Technical menu’’

• Press “menu” to conrm.

• With the + - keys, select “Product Type”, “Service”, “Counter memories”, “Parameters”.

• Press ‘’menu’’ to conrm and ‘’esc’’ to exit.

INFO MENU

• Product type

• Firmware version

• Software info

• Total hours

• No. of start-ups

• Rpm evacuator

• T. smoke

• Heat exchanger voltage

• Feed screw loading

• Flame

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MCZ TEIA COMFORT AIR 10 S2 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von MCZ TEIA COMFORT AIR 10 S2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info