Bedienungsanleitung MCZ Vivo 80 Pellet COMFORT AIR (Seite 37 von 60) (Englisch)

643409

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

8:20

°C

TIMER

°C

12:07

°C

TIMER

ECO

12:06

°C

ECO

8:20

°C

TIMER

°C

12:07

°C

TIMER

ECO

12:06

°C

ECO

8:20

°C

TIMER

°C

12:07

°C

TIMER

ECO

12:06

°C

ECO

8-LCD REMOTE CONTROL

TIMER MODE (TIMER)

Select this operating mode to switch the product on and o automatically, according to 6 customised time bands (P1 – P6). The following

can be set for each time band:

• start-up time.

• Shutdown time.

• Desired room temperature during that time band.

• Days of the week when the time band is to be activated.

When the product is switched on (manually via button A or automatically via a time band), it operates in the automatic mode, described

above. A time band appears automatically when it is active (P1 in gure 3) and the desired temperature is changed to the value set in the

time band. However, the user can always modify this value as desired and in real time.

Refer to "Timer Settings" to learn how to set the time bands.

ECO MODE (ECO)

This mode is activated/deactivated by pressing key B for 5" on the remote control while it is switched on.

ECO is an automatic mode with the only dierence that if the set temperature is reached and remains so for the subsequent 20 minutes

(despite ame modulation), the product is switched o and remains on stand by until the room temperature drops 2 degrees below the

desired temperature (and in any case for at least 5 minutes from the last shutdown). The product is then switched on again. Figure 4

If the room is not suciently insulated, ame modulation does not allow the set temperature to be met for 20 consecutive minutes and

the product will not go o.

NOTE: It is recommended to use the ECO mode only in well-insulated rooms in order to prevent start-up and shutdown from

occurring within short periods of time.

The remote control remains on even when the product is o when in ECO mode, in order to indicate that this shutdown is only temporary.

Obviously, if the product is switched o from key A, ECO mode is exited and the product remains o.

Up to 6 automatic start-up and shutdown time bands (E1 – E6) can also be set in ECO mode, which are independent from those of TIMER

mode (P1 – P6). If they have been activated, TIMER-ECO appears on the display (gure 5) permanently, even if the remote control is

switched o.

Refer to "Timer Settings" to learn how to set the time bands.

NOTE: If the remote control is switched o in TIMER mode, ECO mode can only be re-activated by the user (key A) or when

started-up by the next valid time band. Combined use of TIMER and ECO modes requires a good knowledge of the product

operating logic.

FIGURE 3.

FIGURE 4

FIGURE 5

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MCZ Vivo 80 Pellet COMFORT AIR Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von MCZ Vivo 80 Pellet COMFORT AIR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info