568575

ME VDV 860 Seite 9

9
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
ENGLISH  |      VDV800
9
Opening time of the door opener
The dip switches (figure 2.3, no. 10) are used to set how long the door
opener should be activated. The possible settings are either 1 second
or 5 seconds. 5 seconds are set at the factory and function for most
standard door openers.
Switch 1 ‘off’, Switch 2 ‘on’ is equivalent to an opening time of 1
second.
Switch 1 ‘on’, Switch 2 ‘off’ is equivalent to an opening time of 5
seconds.
OPERATION
1. Press the bell button.
2. The set ringing tone will sound at the relevant indoor station/s and
the screen shows the picture from the outdoor station.
3. Accept the conversation at the indoor unit by briefly pressing the
speak button (MOUTH).
4. If an additional camera is connected to the outdoor station you can
switch to this by briefly pressing the ‘MONITOR’ button. Pressing
the ‘Monitor’ button again switches back to the internal camera.
5. If a door opener is connected then you can activate the door
opener by pressing briefly on the door opener button (KEY).
6. Switch the system back to standby operation by briefly pressing the
speak button (MOUTH).
TECHNICAL DATA
Operating voltage: 15 V DC
Current consumption: 130 ± 50 mA
Temperature range: -10°C to +50°C
Door opener connection: DC 12V, max. 1A
INFORMATION
Information regarding CE - Conformity
The functionality of the unit can be affected by the influence of strong
static, electrical or high frequency fields (discharging, mobile phones,
radios, microwaves).
Cleaning and maintenance
Always disconnect mains powered units from the mains supply before
cleaning (disconnect the plug). The unit housing can be cleaned using
a soapy soft cloth. Do not use any abrasive materials or chemicals.
Remove dust build-up from ventilation slits using a brush and clean up
using a vacuum cleaner. Do not hold the vacuum cleaner nozzle directly
against the unit.
Safety instruction
In the event of damage to the housing, connectors, power cables or
isolation shielding, switch off the device immediately and disconnect
from the mains power.
ELECTRIC SHOCK – DANGER OF LOSS
OF LIFE. (Unplug the mains connector from the socket!). Damage
should be repaired immediately by a specialist!
Never carry out repairs yourself!
Warranty
2 years warranty from date of purchasing, on base of correct using.
The producer is not responsible for consequential damages which are
effected directly or indirectly from this item.
SAFETY NOTES
The warranty will be null and void in case of damages arising from
violations of these operating instructions. We are not liable for
consequential damages!
We accept no liability for material damages or injuries arising from
inappropriate use or violation of the safety instructions. In such cases
all warranty claims are null and void!
For reasons of safety and licensing (CE), unauthorised conversion and /
or modification of the product is prohibited.
The design of the product complies with protection class 1. Only a
standard mains socket (230V
~
/50Hz) of the public mains supply may
be used to power the device. Devices powered by mains voltage must
be kept away from children. Please therefore be particularly careful in
the presence of children.
Do not take the product apart! There is a danger of
lethal electric shock!
Do not leave packaging material lying about since plastic foils and
pockets and polystyrene parts etc. could be lethal toys for children.
The interior units are suitable only for dry interior rooms (not ba-
throoms and other moist places). Do not allow the devices to get moist
or wet. There is a danger of lethal electric shock!
In industrial institutions, the accident prevention regulations of the
Association of Commercial Professional Associations for electrical instal-
lations and equipment must be observed. Please consult a specialist
should you have doubts regarding the method of operation, the safety,
or the connections of the device.
Handle the product with care – it is sensitive to bumps, knocks or falls
even from low heights.
GB
These operating instruction are published by
m-e GmbH modern-electronics,
An den Kolonaten 37, 26160 Bad Zwischenahn/Germany
The operating instructions reflect the current technical specifications at
time of print. We reserve the right to change the technical or physical
specifications.
VDV-800_I-Manual_Fin2.indd 9 26.10.12 12:17
… 9 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für ME VDV 860 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info