6
PRODUCT IDENTIFICATION
---------------------------------------------------------------------------------------------------------------------------------------
As a company we understand the urgency of Climate Change and recognise how important it is to
play our part in becoming more environmentally friendly. For this reason, we have stopped including
continuous drainage hoses in our dehumidifiers to reduce the amount of plastic waste created, as
most of our customers do not use them. If you would like to use the continuous drainage option on
your dehumidifier, you can either purchase a hose from our website (www.meaco.com) or use a
garden hose that has an internal diameter of 12mm.
HOW TO EMPTY THE WATER TANK
The water tank is found on the front of the unit. In order to empty the water tank, simply pull the tank
out from the unit, remove the lid and empty the water. The water collected can be used to water house
plants only – do not consume.
HOW TO USE CONTINUOUS DRAINAGE
If you wish to drain water away continuously and not empty the water tank, a hose can be attached as
per the image above. In order to use continuous drainage, remove the water tank from the unit. Open
the circular flap on the back of the unit (to the bottom right of the filter) and push the hose through the
hole securing it to the internal outlet pipe. Once the hose is in place, put the water tank back into the
unit (for continuous drainage to work, the water tank must always be in place). Make sure the hose runs
downwards, with no kinks, bends or blockages, to allow water to run out of the unit via gravity.
