9 [EN]
Cleaning and Storage
---------------------------------------------------------------------------------------------------------------------------------------
Before cleaning the air purifier make sure the power has been turned off and the air purifier is unplugged
from the mains.
The air purifier has one filter which is a combination of the following: the pre-filter, the HEPA filter and
the carbon filter.
1. The pre-filter must be cleaned every two weeks using a soft cloth to brush away any dust or
dirt. Do not clean the pre-filter with water or a hoover.
2. The HEPA and charcoal filters cannot be cleaned as they are inside the filter and inaccessible.
3. The whole filter must be replaced when the ioniser/filter button flashes red – it will do this after
2200 hours of use or if it detects a build up of dust and dirt on the filters. See page 4 for the
location of the Ioniser/Filter button. The air purifier will continue to run with the ionizer/filter
button flashing red but the filter must be changed or the air purifier may become damaged.
To replace the filter, follow the six steps below: