9 [EN]
Control Panel
---------------------------------------------------------------------------------------------------------------------------------------
Please note the Heat LED will only show on the display if you have a CH (Cooling and Heating)
model.
Power Button
When first plugged in the portable air conditioner will enter standby mode. All lights on the display will
turn on for one second and then switch off (apart from the Power Button which will continuously stay lit
up). Press the Power Button to switch the unit on – the unit will enter the default Fan Mode and the
default temperature (23°C). The compressor will start working with a 3-minute delay. Press the Power
Button again to turn the unit off, the compressor will stop at once and the fan will stop ten seconds after
the Power Button has been pressed.
Mode Button
Press the Mode Button to scroll through the available modes: Cool, Dry, Fan and Heat. (Heat is only
available on the CH models). An LED light will indicate which mode is currently in use. Please note
there is also a Sleep Mode which is only available via the remote control.
Up and Down Buttons
Use the UP and DOWN buttons when choosing a desired temperature or setting the On / Off timer.
Timer Button
Use the Timer Button to set either an On or Off Timer between 1 and 24 hours (see page 12 for
instructions).
Fan Speed Button
Use the Speed Button to select either Low or High Fan Speed. This function is disabled in Dry and
Sleep Mode. An LED light will indicate which mode is currently in use.
