Bedienungsanleitung Meade ETX-105AT (Seite 45 von 60) (Englisch)

470208

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

MAINTENANCE

Your ETX model telescope is a precision optical instrument designed to yield a

lifetime of rewarding observations. Given the care and respect due any precision

instrument, the telescope will rarely require factory servicing or maintenance. Use the

following guidelines:

1. Avoid cleaning the telescope’s optics: a little dust on the front surface of the

telescope’s correcting lens causes virtually no degradation of image quality and

should not be considered reason to clean the lens.

2. When absolutely necessary, remove dust from the front lens with gentle strokes of

a camel-hair brush or blow it off with an ear syringe (available at any pharmacy).

Do not use a commercial photographic lens cleaner.

3. You may remove organic materials (e.g., fingerprints) from the front lens with a

solution of 3 parts distilled water to 1 part isopropyl alcohol. A single drop of

biodegradable dishwashing soap may be added per pint of solution. Use soft, white

facial tissues and make short, gentle strokes. Change tissues often.

Caution: Do not use scented, colored or lotioned tissues or damage could

result to the optics.

4. In the very rare situation where cleaning the inside surface of the corrector lens

becomes necessary, unthread the lens cell located at the front of the main tube.

The entire correcting lens and secondary mirror system are mounted in this cell.

You may use the lens-cleaner solution described in step 3 to clean the inside

surface of the lens.

Caution: Do not touch the aluminized circular surface of the secondary

mirror with a finger, a tissue or any other object. This will almost certainly

scratch the mirror surface.

Note: When cleaning the inside surface of the correcting lens, leave the lens

mounted in its metal cell throughout the process. Do not remove the lens

from its metal housing or optical alignment of the lens will be lost,

necessitating a return of the telescope to the Meade factory.

5. If your ETX model is used outdoors on a humid night, telescope surfaces may

accumulate water condensation. While such condensation does not normally

cause any damage to the telescope, it is recommended that the entire telescope

be wiped down with a dry cloth before being packed away.

Do not, however, wipe

any of the optical surfaces. Rather, simply allow the telescope to sit for some time

in warm indoor air, so that the wet optical surfaces can dry unattended. In addition,

the dust cap should not be placed back on to the optical tube until the telescope is

thoroughly dry.

6. If your ETX model is not to be used for an extended period, perhaps for one month

or more, it is advisable to remove the eight AA-size batteries from inside the drive

base. Batteries left installed for prolonged periods may leak, causing damage to the

telescope’s electronic circuitry (see

HOW TO ASSEMBLE YOUR TELESCOPE AND TRI-

POD, page 12).

7. The super-gloss anodized finish of any ETX model’s deep-violet optical tube fades

if left in direct sunlight for prolonged periods.

8. Do not leave your ETX model outdoors on a warm day or inside a sealed car for an

extended period of time; excessive ambient temperatures can damage the

telescope’s internal lubrication and electronic circuitry.

9. A set of two (English-format) hex wrenches is provided with ETX models. These

wrenches are used as follows:

• Small wrench (.05”): Use the small wrench to tighten the set-screws of

any knobs that may loosen (

e.g., the focus knob or flip-mirror control

knob).

• Medium wrench (1/16”): This wrench is used to detach the viewfinder

bracket from the telescope’s rear cell.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Meade ETX-105AT Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info