Bedienungsanleitung Meade Goto-Kit for equatorial EQ-5 Mounts (Seite 7 von 40) (Englisch)

632901

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Instruction Manual

Note: Pressing MODE repeatedly while in the “Select Item” level

moves the handbox to the topmost screen: “Select Item: Object.”

Note: If MODE is pressed and held for two seconds or more,

information about the telescope‘s status displays. When the status

displays, press the Scroll keys (7, Fig. 2) to display the following

information and more:

•

Right Ascension and Declination (astronomical) coordinates

•Altitude (vertical) and Azimuth (horizontal) coordinates

• Local Time and Local Sidereal Time (LST)

• Timer and Alarm Status

Press MODE again to return to the previous menu.

E GO TO Key: Press to slew (move) the telescope to the coordinates of the

currently selected object. While the telescope is slewing, the operation may

be aborted at any time by pressing any key except GO TO. Pressing GO

TO again resumes the slew to the object. Also, press GO TO after a slew is

completed to activate a „spiral search.“

F

Arrow Keys: Press to slew the telescope in a specific direction (up, down, left,

and right), at any one of nine different speeds. See

SLEW SPEEDS, page 9.

G Number Keys: Press to input digits 0 to 9. When data is not being entered,

the Number keys can be used to change the slew speed. To operate, just

press a number key (1 is the slowest speed, 9 is the highest speed). Press

the Number key „0“ to turn on and off the red utility light on the top of the

handbox.

H Scroll Keys: Press to access options within a selected menu. The menu is

displayed on the first line of the screen. Options in that menu are displayed,

one at a time, on the second line. Press the Scroll keys to move through the

options. Press and hold a Scroll key to move quickly through the options.

I ? Key: Press to access the „Help“ function. Help provides on-screen infor-

mation on how to accomplish whatever task is currently active.

Hold down the ? key and then follow the prompts on the display to access

details of the handbox functions in the Help feature. The Help system is

essentially an on-screen instruction manual.

If you have a question about an handbox operation, e.g., INITIALIZATION,

ALIGNMENT, etc., hold down the ? key and follow the directions that scroll

on the second line. When satisfied with the Help provided, press MODE to

return to the original screen and continue with the chosen procedure.

J Coil Cord Port: Plug one end of the coil cord (see 1) Fig. 1a) into this port

located at the bottom of the handbox and the other end into the HBX port

of the computer control panel (A, Fig. 1d).

1) Coil Cord: Plug one end of the coil cord into the HBX port (A, Fig. 1d) of the

computer control panel of the telescope and the other end into the handbox

coil cord port (See

J Fig. 1a).

1! RS232 Port: To connect a RS-232 cable to your computer to make data

transfer possible such as “Download” or “Clone”.

1@ Utility Light: Use this built-in red light to illuminate star charts and acces-

sories without disturbing your eye‘s adaptation to darkness. Press „0“ to

turn the light on and off.

EWant to learn more

about using the GO

TO function? See

page 16.

Want to learn how

to perform a spiral

search? See page 18.

Definitions:

„Slew“ means to move the

telescope‘s optical tube to

a selected object.

Tip:

If the „ENTER to Sync“

feature is accessed by

mistake, press MODE to

return to the previous

screen.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Meade Goto-Kit for equatorial EQ-5 Mounts Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info