Bedienungsanleitung Meade Goto-Kit for equatorial EQ-5 Mounts (Seite 13 von 40) (Englisch)

632901

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Instruction Manual

8. If you have previously entered the Country/State and City of your observing site

(as described in ACTIVATE THE ARROW KEYS, page 9), go to step 9. If you have

not entered this information, perform the following steps:

a. The handbox prompts you to enter the Country or State (listed alphabetical-

ly) of the observing site. Use the Scroll keys to cycle through the database

of countries, states, and provinces. Press ENTER when the correct location

displays.

b. The handbox then prompts you to enter the nearest city (listed alphabeti-

cally) to the observing site. Use the Scroll keys to cycle through the data-

base of cities. Press ENTER when the correct city appears on screen.

9. The handbox then prompts you to enter the model number of your telescope.

Use the Scroll keys to cycle through the list of telescope models. Press ENTER

when the correct model appears on the display.

Note: The handbox only prompts you to enter Country/State and City and

model number the first time it is activated. These prompts do not appear

again, unless you reset the handbox (see

RESET, page 24). However, if

you need to enter this information (e.g., you change your geographic

location), you can do so by using the Site option of the Setup menu. See

ADDING OBSERVING SITES, page 25, for detailed information.

10. System Initialization is complete and the display reads „Align: Easy.“ After per-

forming the Initialization procedure, you MUST train your drive.

Training the Drive

Next, train the drive using the handbox. Perform this procedure the first time you

use the handbox with your telescope, after a Reset, or if you are experiencing any

pointing accuracy problems. Training the drive gives your telescope a higher degree

of pointing accuracy.

Note: Use a terrestrial object, such as a telephone pole or lamp post, to

train the drive. It is best to perform this procedure during the daytime.

1. If you have just performed INITIALIZING HANDBOX, go to step 2.

If you have not yet initialized the handbox, go to page 12 and follow the procedure

described in INITIALIZING HANDBOX.Then go to step 2 of this procedure.

2. Keep pressing MODE until „Select Item: Object“ displays.

3. Press the Scroll Up key once. „Select: Item: Setup“ displays.

4. Press ENTER to access the Setup menu. „Setup: Align“ displays.

5. Keep pressing the Scroll Up key until „Setup: Telescope“ displays.

6. Press ENTER to access the Telescope menu. „Telescope: Focal Length“ dis-

plays.

7. Keep pressing the Scroll Down key until „Telescope: Train Drive“ displays.

8. Press ENTER to choose the Train Drive option. „Train Drive: Az/RA Train“ dis-

plays.

9. Press ENTER to begin Az/R.A. (Right Ascension) training.

10. „Drive Setup: For this....“ begins to scroll across the display. This is a reminder

to point your telescope at a terrestrial object. Loosen the R.A. and Dec. locks (1

and 17, Fig. 1a) and point the telescope at an object. Then re-tighten the locks.

Press ENTER when the telescope is pointing at the desired terrestrial object.

11. „Center reference object“ displays. Center your target object using the Arrow

keys. When centered, press ENTER.

12. The telescope slews and „Press > until it is centered“ displays. Press the Right

Arrow key until the target is centered again. Then press ENTER.

Note: If you pass the object when pressing the Arrow key, you cannot

slew the telescope back in the other direction. Press MODE until „Train

Drive: Az/RA Train“ displays and begin the procedure over again.

13. The telescope slews and „Press < until it is centered“ displays. Press the Left

Arrow key until the target is centered again. Then press ENTER.

14. „Train Drive: Az/RA Train“ displays again. Press the Scroll Down key and „Train

Drive: Alt/Dec Train“ displays. Press ENTER to begin Alt/Dec. (Declination) train-

ing.

15. „Drive Setup: For this....“ begins to scroll across the display. This is another

reminder to point your telescope at a terrestrial object. Loosen the R.A. and Dec.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Meade Goto-Kit for equatorial EQ-5 Mounts Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info