632901
23
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
23
Instruction Manual
b. Lunar: Choose this option to properly track the Moon over long
observing sessions.
c. Custom: Allows entry of user-defined tracking rates.
Reverse L/R: Reverses the functions of the Left and Right Arrow keys (i.e.,
the Right key moves the telescope to the left).
Reverse U/D: Reverses the functions of the Up and Down Arrow keys (i.e.,
the Up key moves the telescope down).
Quiet Slew: Sets the maximum slew rate to 1.5° for quieter operation.
Max Elevation: Allows you to enter a value in degrees that sets a limit as
to how far the optical tube can swing upward during a programmed slew.
(Note that it does not prevent you from performing a manual slew past this
limit.) This is useful when you have a camera or other peripheral attached
to the telescope — you can prevent it from striking the telescope base.
Min AOS (Acquisition of Signal): Allows you enter a value in degrees. This
value represents the altitude at which your telescope begins to slew when
acquiring a satellite track. This is useful when you are observing satel-
lites, but a tall tree or building is obstructing the telescope. For example,
you might begin to track the satellite at 15° altitude, instead of 5°. See
OBSEVING SATELLITES, page 34, for more information about satellites.
Calibrate Motor: If the telescope motors appear to have a problem, use
this option to retest the motors before performing a Reset. This option is
also used if a handbox unit is moved between telescopes, to match the
handbox to the new telescope. To calibrate the motors, select this option
and press ENTER.
Smart Drive: Allows you to perform periodic error correction (PEC) on the
R.A. drive worm gear. Must be performed with a high-power reticle (eg.,
9mm).
High Precision: If High Precision is turned on, when looking for a faint
celestial object (i.e., a nebula or galaxy), handbox first slews to a nearby
bright star and displays „ENTER to Sync.“ Center the star in the eyepiece,
then press ENTER. At that point the telescope has a high precision align-
ment to that part of the sky and it then slews to the object that was origi-
nally requested.
Targets switches between Astronomical targets and Terrestrial targets. If
„Astronomical“ is selected, the telescope tracking motor is activated and
any object you observe will remain centered in the eyepiece. If „Terrestrial“
is selected, the tracking motor is turned off. To learn how to track an object
automatically, see page 16.
Site provides access to several options including:
Select: Displays the currently selected observing site. Use the Scroll keys
to cycle through all available sites (see ADD below). Press ENTER when
the site you wish to select displays. Use this option when you move to a
different geographic location.
Add: Allows you to add new observing sites to the database (up to six sites
may be stored). Scroll through the list of Countries/States. Press ENTER
when the site you wish to add displays. Then choose the desired city in the
same manner.
Delete: Deletes a stored site from the database.
Edit: Edits a selected site, including: the name, latitude, longitude, and
time zone. Time Zone refers to the Greenwich Mean Time (GMT) time zone
shift. Users West of Greenwich, England use “-” hours, East of Greenwich
use “+” hours. For the United States, look up the time zone shift in Table
1.
Note: The handbox compensates for daylight savings time,
if selected. See SETUP MENU: DAYLIGHT SAVING, page 22.
Owner Info accesses the owner information menu, including:
Name: Users may enter both their first and last names using the Up and
Down Arrow keys to cycle through the alphabet. Use the Right and Left
Arrow keys to move through the text. Press ENTER when the entry is com-
plete.
Tip:
If the „ENTER to Sync“
feature is accessed by
mistake (holding the
ENTER key for more than
2 seconds), press MODE
to return to the previous
screen.
Want to learn more about
adding and editing
sites? See page 25.
Tip:
The Reverse L/R and U/D
functions are useful if
you are observing in the
Southern hemisphere.
Time Zone Shift
Universal-Time 0 Hours
Central European
Time +1 Hour
Eastern European
Time + 2
Hours
Table 1: Time Zone Shift.
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Meade Goto-Kit for equatorial EQ-5 Mounts wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info