Bedienungsanleitung Meade Goto-Kit for equatorial EQ-5 Mounts (Seite 28 von 40) (Englisch)

632901

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Instruction Manual

move the telescope‘s optical tube and center this object in the telescope

eyepiece.

2. Display the „Setup: Targets“ menu option. Choose „Terrestrial“ and press

ENTER. „Setup: Targets“ displays again. Choosing this option turns off

tracking for astronomical objects which is not useful for the viewing of ter-

restrial objects such as those in the Landmark database. Be sure to change

this option back to „Astronomical“ when you wish to view celestial objects

again.

3. Press MODE once. „Select Item: Setup“ displays.

4. Press the Scroll Down key once and „Select Item: Object“ displays. Press

ENTER. „Object: Solar System“ displays.

5. Press the Scroll Up key twice and „Object: Landmarks“ displays. Press

ENTER. „Landmark: Select“ displays.

6. Press the Scroll Down key once. „Landmark: Add“ displays. Press ENTER.

7. „Landmark Name“ displays. Using Arrow keys, enter a name for the land-

mark you wish to add to the database. When finished, press ENTER.

8. „Center Landmark. Press Enter“ displays. Using only the Arrow keys (do not

manually move the telescope), move the telescope to the desired landmark

and center the object in the eyepiece. Press ENTER. The object is now

stored in memory.

9. „Landmark: Add“ displays. If you wish to add more landmarks, repeat steps

5 through 7.

To Select a landmark from the database

1. Make sure the telescope is located and aligned exactly as when the desired

landmark was entered into memory.

2. Display the „Landmark: Select“ menu option. Press ENTER.

3. Use the Scroll keys to scroll through the list of objects you have previ-

ously entered. When the desired object displays, press ENTER to select the

object.

Use the Scroll keys to scroll through location information about the object,

if desired. Press GO TO to slew the telescope to the landmark.

4. Press MODE to exit.

To perform a Landmark Survey

This procedure allows you to perform a tour of the objects entered in the „Object:

Landmark“ menu option — note that the Landmark Survey will function only if

you have previously entered objects in the Landmark menu.

1. Navigate to the „Utilities: Landmark Survey“ menu and press ENTER.

2. „Landmark Survey: Slewing...“ displays. The telescope moves to the first

object on the Survey list and displays the name of the object.

3. Press MODE to pause the Survey. Press ENTER to restart the survey at the

first object of the survey.

To Check on the Available Memory

The handbox has a limited amount of memory. Once you begin to store

Landmarks, user objects and other bits of information in the handbox, you will

begin to use up memory. This procedure allows you to check on how much

memory is still available.

1. Navigate to the „Setup: Statistics“ menu option and press ENTER.

2. „Statistics: 37.2K Char. Free“ displays. This is the amount of memory that is

still available to the user.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Meade Goto-Kit for equatorial EQ-5 Mounts Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info