Bedienungsanleitung Mede8er MED1000X3D (Seite 18 von 47) (Englisch)

491952

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

Emergency Method (Resets Configuration to Default)

Disconnect the power jack at the rear of the X3 then plug it back in - Now press the on/off button and hold it

pressed for 20 seconds and then release.

After approximately 15 seconds the LED on the X3 will flash blue and you will get a progress bar on your TV

display (some TV's will not display this) wait until the X3 re boots itself +- 60 sec. Your X3 firmware is now

updated.

Download the latest X3 Firmware from www.mede8erforum.com. UnZIP or UnRAR or join with HJ Split and

will find a file named install.img. Copy this file to the root directory of a Flash Drive. Plug the USB Flash drive

into one of the USB Host Ports on the X3.

DO NOT REMOVE POWER DURING THE EMERGENCY RECOVERY PROCEDURE.

Setup Menu Update with Auto Configuration Restore

Open the Setup Menu and select the “Misc” tab. Now select USB upgrade option. After +- 5 sec the screen

will display the current Firmware Version and the New Firmware Version. You will have the option to select

“OK” or “Cancel”. Select “OK” and the X3 will reboot and after +- 10 seconds the update process will begin.

During the update process the top Navigation Buttons LED will flash and you should see an install progress

bar on your TV screen. After the update is complete the X3 will reboot with the new firmware installed.

If the X3 does not reboot within 5 seconds (after pressing the "Enter" button) then

press the "Home" button to initiate

USB Host Port Press on/off button for 20 Sec

FIRMWARE UPDATE

The X3 comes with a DLNA DMR function. That stands for Digital Living Network Alliance Digital Media

Renderer. That means another DLNA device can use the X3 to process media without you having to do

anything else with the X3 other than turning it on. Music can be played without having to turn on the TV, or

you can display photo's on your TV directly from your phone.

A Device which controls this process is called a DLNA DMC - Digital Media Controller. You can get DMC apps

for many devices - Android phones / tabs - Iphone / Ipad. Android Honeycomb dosn't come with a DMC

installed. Android Market has a lot of them, but not all are able to detect both the X3's DMR, and the X3's

Upnp server successfully. Bubbleupnp has been tested with X3 and we suggest that this is a good app to start

playing and testing DLNA DMR functionality. Remember to turn the DMR ‘on’ in the X3 Setup Menu.

DLNA DMR

Page17

REMOTE CONTROL OVER NETWORK

Enable the Web Remote in the Setup Menu. Remote Control the X3 from a mobile device such as a iPhone,

iPad or any device that has WiFi and a built in Web Browser. Enter the X3 IP into your Web Browser with the

correct Port number eg http://xxx.xxx.xxx.xxx:1024 “x” is your actual IP

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mede8er MED1000X3D Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mede8er MED1000X3D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info