491958
40
Zoom out
Zoom in
Vorherige Seite
1/42
Nächste Seite
NFS (Network File System)
By default MED600X3D uses Samba to stream content on a local network and this should be more than
sufficient for most users. NFS can be used for higher bittrate streaming from a NAS or PC. On a Windows
PC you will require a NFS client to be running on the host PC. The MED600X3D has been tested and
verified with HaneWin but other NFS Servers should work equally as well. Download HaneWin at
http://www.hanewin.net/nfs-e.htm
NFS Mount ‘Auto Scan’
MED600X3D will Scan the NFS servers on the same IP segment, on boot up. Select the NFS tab on the
Devices Page and will see all the NFS mounts that MED600X3D located. You can make a Favourite Link
from a NFS shortcut ie focus on the NFS Link and press the ‘Menu’ button and select option ‘Add to
Favourite’ Note the NFS mount path cannot be added as a shortcut so you may need to create an extra
folder as the main mount with sub folders that can be linked as MED600X3D Shortcuts.
To “Add” “Modify” or “Delete” a NFS shortcut press the “Menu” button and the Menu screen will open.
Select Add NFS Client and a “ADD NFS Dialogue” screen will open. Fill in the IP Address of the Host PC
and the Share Name (Folder Path).
IMPORTANT NOTE:
You may have to enable “Flow Control” or disable “Jumbo Frames” on your Network Card settings if you
are using NFS with a 1GB switch on your network. Once a NFS share has been mounted you can press
‘F1' to display NFS mount information that will look like this .
vers=3,rsize=32768,wsize=32768,proto=udp,port=65535,timeo=7,retrans=3,addr=192.168.10.20
For max streaming performance rsize should be 32768 bytes
Recommended Settings HaneWIN
UDP NFS Server Threads : 32
Max NFS tranfer size : 32768
Page39
NFS (Network File System)
Additionally you can perform a manual NFS scan with 'Probe NFS' option in the NFS menu. Select this
option and fill in the IP Address you require to scan and select ‘Probe’. MED600X3D will scan the IP for
valid NFS mounts and then display the mounts it finds.
40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Mede8er MED600X3D wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Mede8er MED600X3D

Mede8er MED600X3D Bedienungsanleitung - Holländisch - 47 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info