Bedienungsanleitung Mede8er MED800X3D (Seite 16 von 46) (Englisch)

561348

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

Emergency Method (Resets Configuration to Default)

Disconnect the power jack at the rear of the X3D then plug it back in - Now press the on/off button and hold it

pressed for 20 seconds and then release.

After approximately 15 seconds the LED on the X3D will flash blue and you will get a progress bar on your TV

display (some TV's will not display this) wait until the X3D re boots itself +- 60 sec. Your X3D firmware is now

updated.

Download the latest X3D Firmware from www.mede8erforum.com. UnZIP or UnRAR or join with HJ Split and

will find a file named install.img. Copy this file to the root directory of a Flash Drive. Plug the USB Flash drive

into one of the USB Host Ports on the X3D.

DO NOT REMOVE POWER DURING THE EMERGENCY RECOVERY PROCEDURE.

Setup Menu Update with Auto Configuration Restore

Open the Setup Menu and select the “Misc” tab. Now select USB upgrade option. After +- 5 sec the screen will

display the current Firmware Version and the New Firmware Version. You will have the option to select “OK” or

“Cancel”. Select “OK” and the X3D will reboot and after +- 10 seconds the update process will begin. During

the update process the top Navigation Buttons LED will flash and you should see an install progress bar on

your TV screen. After the update is complete the X3D will reboot with the new firmware installed.

If the X3D does not reboot within 5 seconds (after pressing the "Enter" button)

then press the "Home" button to initiate

FIRMWARE UPDATE

The X3D comes with a DLNA DMR function. That stands for Digital Living Network Alliance Digital Media

Renderer. That means another DLNA device can use the X3D to process media without you having to do

anything else with the X3D other than turning it on. Music can be played without having to turn on the TV, or

you can display photo's on your TV directly from your phone.

A Device which controls this process is called a DLNA DMC - Digital Media Controller. You can get DMC apps

for many devices - Android phones / tabs - Iphone / Ipad. Android Honeycomb dosn't come with a DMC

installed. Android Market has a lot of them, but not all are able to detect both the X3D's DMR, and the X3D's

Upnp server successfully. Bubbleupnp has been tested with X3D and we suggest that this is a good app to

start playing and testing DLNA DMR functionality. Remember to turn the DMR ‘on’ in the X3D Setup Menu.

DLNA DMR

Page15

REMOTE CONTROL OVER NETWORK

Enable the Web Remote in the Setup Menu. Remote Control the X3D from a mobile device such as a iPhone,

iPad or any device that has WiFi and a built in Web Browser. Enter the X3D IP into your Web Browser with the

correct Port number eg http://xxx.xxx.xxx.xxx:1024 “x” is your actual IP

Power Up and hold on/off

button for 10 seconds

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mede8er MED800X3D Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mede8er MED800X3D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info