Bedienungsanleitung Medion md 30036 (Seite 5 von 156) (Englisch, Dänisch, Schwedisch, Norwegisch, Finnisch)

141354

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

Safety instruction

Intended Environment

• The device can be operated at an ambient temperature of between +41°F and +95°F (5° C to 35° C).

• Provide an interval of at least one meter from high-frequency and magnetic sources of interference (television sets,

loudspeakers, mobile telephones, etc.) in order to avoid malfunctions and data loss.

• After transporting your LCD TV please wait until it has assumed the ambient temperature before connecting and switch-

ing it on. Extremely high variations in the temperature or humidity may result in condensation forming on the inside of

the LCD TV which could cause an electrical short-circuit.

• Pull the plug out of the socket and the aerial cable from the aerial socket during a thunderstorm or if the television

will not be used for a longer period.

Power Supply

Please pay attention: Pats of the device are still live, even if the mains switch is switched off. Pull the

mains plug out of the socket, to interrupt the power supply to your LCD TV or to release the device from

voltage completely.

• Operate your TFT display mains (power supply) only on grounded sockets with 230 V ~ 50 Hz.

• For additional safety we recommend use of an excessive voltage protection device to protect your LCD TV from damage

resulting from voltage surges or lightning.

• To interrupt the display from mains (power supply) disconnect the plug from the socket.

• The power socket must be in the vicinity of your LCD TV and within reach of the power cables.

• You should lay the TFT Display cables in a manner that no one can trip or step on it.

• To avoid damage of cable do not place any objects or furniture on the cable.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the in-

structions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to

operate the equipment. Shielded interface cables, if any, must be used in order to comply with the emission limits.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Medion md 30036 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Medion md 30036

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info