Bedienungsanleitung Medion MD 31454 - Life X15556 (Seite 28 von 78) (Englisch)

753400

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

7.6. Selecting the source

Please note that the source (the connected device) is only recognised when connecting

using the (SOURCE) button or in the TV menu, if this source is activated in the SETTINGS

> SYSTEM > SOURCES menu or in the SOURCES > SOURCE SETTINGS menu.

Use the (SOURCE) button to select the inputs for the connected devices. When the SOURCES

LIST menu is open, press the corresponding digit to select the desired source directly.

1. TV TV mode (antennas, satellites and cable signals are played back)

2. BACK AV Audio/video input (AV)

3. HDMI1 HDMI input 1

4. HDMI2 HDMI input 2 (HDMI 2 can be used for CEC/ARC)

5. HDMI3 HDMI input 3

6. HDMI4 HDMI input 4

7. YPBPR Device on the VGA input via an adapter (YUV/YPbPr)

8. VGA/PC Device on PC input

9. WIRELESS DISPLAY Playback content from another external player

USBDISK USB storage medium (optional) (the name can differ, if necessary)

USB2 USB storage medium (optional) (the name can differ, if necessary)

AUDIO VIDEO SHARING Network service for data exchange between devices (optional)

Alternatively, use the direction buttons  to go to the desired source.

Confirm your selection with the OK button.

If the CEC function is enabled, the HDMI source could be renamed from the external player if

necessary. The remote control of the TV set controls the connected devices. If the 0 button on

the remote control is pressed for several seconds, this controls the television again.

The source can also be selected using the multifunction switch on the device. For this,

press the button to open the function menu. Then press again to select the source selec-

tion option. Press and hold the button to access the source menu. Press again to select the

source and long press to confirm the selection. In addition, you can call up all activated

sources in the menu SOURCES > SOURCE SETTINGS.

7.7. Wireless display

Via wireless display you have the option of playing content from an external player (e.g. tablet PC,

smartphone etc.) via the television. The external device must have at least Android version 4.2 in-

stalled. The WIRELESS DISPLAY function is only available for Android devices.

Select WIRELESS DISPLAY as the source. The “Wireless display – ready to connect” start screen ap-

pears.

You must activate screen mirroring on the playback device. The playback device now detects the

available TV sets with which a connection can be established.

After the television is selected, a connection is established. Notification “Connection with wireless

display is made” appears. Then the TV will mirror the screen content of the playback device.

Wireless display can only be used if the mobile device supports this function.

The detection and connection processes differ depending on the programs you use.

Please refer to the operating instructions of your playback device. Android-based mobile

devices should have the software version 4.2 or higher.

Due to the great variety of different devices and software versions, faultless functionality

cannot be guaranteed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Medion MD 31454 - Life X15556 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Medion MD 31454 - Life X15556

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info