458990
2
Zoom out
Zoom in
Vorherige Seite
1/2
Nächste Seite
85961_QSG_EN_RC1.FH11 Mon Jan 12 09:48:22 2009 Seite 2
Probedruck
C M Y CM MY CY CMY K
Preventing fire hazards
· Always uncoil the entire length of the mains cable.
· Ensure there is adequate ventilation and never cover the mains adapter.
· Do not place naked flames such as lit candles on or near the unit.
Risk of poisoning
· Keep the battery out of reach of children.
Risk of chemical burns
· If the battery is depleted remove it from the device immediately. There is an
increased risk of leakage. Avoid contact with skin, eyes and mucous membranes.
If these areas come into contact with battery acid, rinse them immediately with
plenty of clean water and contact a doctor immediately.
Preventing damage to the eyes
· Do not use the flash close to anyone's eyes.
· Always maintain a minimum distance of one metre when using the flash, especially
with small children.
· When using the camera function do not direct the flash towards the eyes of people
or animals.
Preventing damage to the ears
· Give careful consideration to volume levels when using ear or headphones. Volume
levels that are too high can produce excessive pressure and can lead to loss of
hearing.
Preventing damage to the camcorder
· If the battery is leaking remove it from the camcorder immediately. Clean the
contacts before inserting a new battery.
· Use type NP60 lithium-ion batteries only.
· Before inserting the battery, check that the contacts in the camcorder and on the
batteries are clean. Clean the battery connections if necessary with a clean, dry
cloth or an eraser.
· Do not touch the lens or lens mounting.
Recording films
Proceed as follows in order to record films:
}
Lift the LC display flap.
}
Select the required display window using TELE/WIDE-ANGLE.
}
Press the shoot FILM button to start recording.
While the film is being recorded, the time is shown on the LC display (hours: minutes:
seconds).
Press the shoot FILM button again to stop recording
.
Film playback
There are different options for viewing the films recorded in the internal memory or
on the optional memory card. This describes how to play back the images or films on
the camcorders LC screen. If you want to use the other playback options, please refer
to the advice in the operating instructions.
Playback on the LC display
Proceed as follows to view the films on the cameras LC displayr:
} Press
RECORD/PLAY.
The main menu for playback mode will appear
.
}
Use the RIGHT/LEFT buttons or TELE/WIDE-ANGLE to select the menu
option required.
} Press OK.
The most recently recorded film will be shown on the LC display. The number of the
film selected will be shown in the top left-hand corner of the display. The second digit
indicates the number of films recorded
.
}
Use the RIGHT/LEFT buttons in order to move to the previous or next film.
}
Press the shoot FILM button to start playback.
} U
se the RIGHT/LEFT buttons to fast forward or rewind during film playback.
} R
elease the button again to stop the fast forward or rewind function
You can use TELE/WIDE-ANGLE to adjust the volume during playback
.
}
Press TELE/WIDE-ANGLE towards T to increase the volume.
}
Press TELE/WIDE-ANGLE towards W to decrease the volume.
Safety Instructions
· Children should be supervised in order to ensure that they do not play with the
device. This device is not intended to be used by individuals with limited physical,
sensory or intellectual abilities or limited experience, and/or a lack of knowledge
(including children), unless they are being supervised by an individual responsible
for their safety or receive instructions from them concerning how the device must
be used.
· Also, keep the plastic packaging out of reach for children to avoid danger of
suffocation.
Preventing electric shocks
· Never open the camcorder casing or mains adapter plug except to insert the
battery.
· Connect the mains adapter plug to a professionally installed 230 V, 50 Hz mains
socket.
· To remove the mains adapter quickly and easily from the mains in an emergency,
the socket must be easily accessible and close to the appliance.
· Do not bend or crush the mains cable.
· Take measures to prevent moisture or liquid from penetrating the camcorder or
mains adapter.
· Do not touch the mains cable with wet hands.
· Never use the camcorder if the mains adapter is damaged.
· Always have repairs carried out by qualified professionals.
· Switch the camcorder off immediately if it malfunctions.
· Do not allow the camcorder or mains adapter to come into contact with rain or
be splashed by water.
· Do not place containers containing liquid, e.g. vases, on the appliance, the mains
adapter or near to these and protect all parts of the device from rain and water.
The container may tip over and the liquid will impair the electrical safety.
Risk of explosion
· Never expose batteries or rechargeable batteries to excessive heat such as sunshine,
fire or similar.
· Do not throw batteries into a fire.
· Never short-circuit any (rechargeable) batteries.
· Do not dismantle (rechargeable) batteries.
Taking photos
Proceed as follows to take photos:
} Lift the LC display flap.
} Select the required display window using TELE/WIDE-ANGLE.
} Press the PHOTO shutter release.
To take photos close up, activate the macro function.
Viewing photos
There are different options for viewing the films recorded in the internal memory or
on the optional memory card. This describes how to play back the images or films on
the camcorders LC screen. If you want to use the other playback options, please refer
to the advice in the operating instructions.
Payback on the LC display
Proceed as follows to view the photos on the cameras LC display:
} Press RECORD/PLAY.
The playback mode menu will be displayed.
} Use the RIGHT/LEFT buttons or TELE/WIDE-ANGLE to select the menu
option required.
} Press OK.
}
Use the RIGHT/LEFT buttons in order to move to the previous or next photo.
}
Slide the TELE/WIDE-ANGLE towards the "T" in order to enlarge the photo on
the LC display
.
}
Slide the TELE/WIDE-ANGLE towards the "W" to reduce the photo on the LC
display.
Proceed as follows to select a specific area of the photo for enlargement:
} Slide the TELE/WIDE-ANGLE towards the "T".
Two rectangles will be displayed, one inside the other. The outer rectangle represents
the whole photo. The inner rectangle represents the selected area within the photo.
} Press OK.
}
The frame of the inner rectangle will change colour.
} Using the TELE/WIDE-ANGLE or RIGHT/LEFT buttons move the inner rectangle
onto the area to be enlarged.
} Press OK
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

medion-md-85961-life-p47002-quickstart

Suche zurücksetzen

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Medion MD 85961-LIFE P47002 Quickstart wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Medion MD 85961-LIFE P47002 Quickstart

Medion MD 85961-LIFE P47002 Quickstart Bedienungsanleitung - Deutsch - 68 seiten

Medion MD 85961-LIFE P47002 Quickstart Bedienungsanleitung - Holländisch - 2 seiten

Medion MD 85961-LIFE P47002 Quickstart Kurzanleitung - Französisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info