6
Ambient Temperature
The tablet is most reliably operated at an ambient temperature between
5° C and 30° C and at a relative humidity between 20% and 80% (without
condensation).
When powered off, the tablet can be stored at temperatures between 0° C and
60° C.
Unplug the power during thunderstorms and make especially sure to remove the
antenna cables, if present. We recommend the use of a surge protector for
additional safety, in order to protect your tablet from being damaged by power
surges or lightning strikes through the power network.
Wait until the tablet has reached ambient (room) temperature before turning it on
or connecting it to the power adapter. Drastic variations in temperature and
humidity can create condensation within the tablet and may cause it to short-
circuit.
For transporting the tablet keep the original packing.
Connecting
Pay attention to the following information in order to connect your tablet correctly:
Power Supply
Do not open the power adapter housing. When the housing is open there is a
danger of severe electric shock. It contains no user-serviceable parts.
The electric outlet must be in the vicinity of the tablet and within reach of the
power adapter cords.
To disconnect your tablet from the power source, or set the tablet to battery
operation, remove the power cord from the tablet’s power socket.
Only use the tablet with a power adapter operating at AC 110-240V~/50-60 Hz. For
details on power consumption, please refer to the rating plate on the rear of your
tablet. If you are unsure of the type of power supply available at the point of use,
ask your local power company.
Use only the supplied power adapter.
To detach the power adapter from the mains power supply remove the plug from
the power source first and then remove the connector from the tablet. A reverse
sequence could damage the power adapter or the tablet. Always hold the
connector firmly when removing it. Never pull on the power cord.
Cabling
Arrange cables so that no one can walk on or trip over them.
Do not place objects on any of the cables.
