Bedienungsanleitung Medion MD1998LE (Seite 11 von 27) (Englisch)

531599

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

Operation Theory Page 9

MD 1998LE (B1997PNST)

3 Operation Theory

This is an I2C-bus fully digital controlled multi-sync color monitor, compliant with VESA DDC1/2B and

DPMS standards. Besides, it also meets TCO95 and MPRII requirements. It provides user friendly OSM

(On-Screen display Menu) controls, and offers the following main features.

3-1 Main Features

1. Simplified chassis design with minimum components.

2. Fully digital controlled via 8-bit microcontroller NT6861AU.

3. Auto switching to off mode under “OUT OF RANGE” (Fh < 29KHz or Fh > 99KHz).

4. Reliable chassis design through various internal circuit protections.

5. Universal full range AC input and low power consumption.

6. Five-country OSM language available for easy user controls.

7. Adjustable OSM display time and position.

8. Twelve preset modes up to 1600 x 1200 75Hz (Fh =93.75KHz).

3-2 Microcontrol Section

1. The microcontroller provides I2C bus (pin 27 & 28) for geometric controls via I401 TDA4856 and video

controls via I501 M52743. The geometric controls include H-size, H-position, V-size, V-position, Pincushion,

Pin-balance, Trapezoid, Corner, Parallelogram, H-focus, V-focus, H-moire and V-moire. The video controls

cover Contrast, Brightness, R/G/B gain and cutoff control alignments. Through 8-bit PWM’s (pin 1, 2, 3,

32, 36, 40) it provides factory controls for G1, NS-trapezoid, H-linearity, ABL, user control for Rotation

and one F/V for H-frequency driver compensation . Two I/O’s (pin 27, 28) are provided for I2C bus used

for I502 MTV021N-21 on-screen display.

2. In addition, the microcontroller offers Auto Mode detection via Hsync (pin 41) and Vsync (pin 42) inputs.

According to Auto Mode detection, VESA DPMS power saving (pin 29, 30) will limit the output power

under 15W for Standby or Suspend mode, under 8W for OFF mode. VESA DPMS mode indication is

done via I/O pin 17 & 18 to drive LED display on the front cover. Normal mode displays green LED,

Standby or Suspend modes displays Yellow LED while OFF mode displays Amber LED.

3. Auto factory alignment (ATE) and VESA DDC2B communication are through DDC I2C bus (pin 27, 28),

I704 24LC211 is dedicated for DDC EDID E2PROM. In order to get optimal H-linearity performance for

the full range frequency (31KHz - 98KHz), 4-channel CS are used at pin 20, 21, 22, 23, 24. F1, F2, UP

and DOWN function keys’ scanning are through 2 ADCs on pin 14 & 15. Q701 and Q702 delay circuits

are used for power-on reset at pin 4. In order to avoid I2C interference during H-size, H-position, V-size,

V-position, Contrast and Brightness alignments, the HUNLK from I401 TDA4856 is applied from Q703

inverter to IRQ at pin 16.

4. There are 12 factory preset modes and 8 user modes available. Related information data of those modes

are stored at 2 EEPROM’s (I702, I703) 24LC04.

3-3 Deflection Section

1. I

C -- autosync deflection controller is TDA4856.

2. The TDA4856 is a high performance and efficient solution for autosync monitors. All functions are

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Medion MD1998LE Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info