Bedienungsanleitung Medion MD81035 (Seite 40 von 143) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

459673

Zoom out

Zoom in

Vorherige Seite

1/143

Nächste Seite

2. Use the number buttons to enter a number between 01

and 99. Always prefix single digit numbers with a "0".

The source key will go out.

3. Lay the universal remote control down so that it is poin

ting towards the television and is not obstructed.

The device will be switched off after the programmed

period.

Cancel function

You can cancel the sleep timer by carrying out the following:

 Enter Setup mode (press and hold the

SETUP

button

for three seconds).

 Press

SLEEP

once.

EPG – Electronic Programme Guide

The

EPG

(“Electronic Program Guide“) button has various

functions, depending on which code has been used:

For TV and satellite codes (e.g. SAT-TV or DVB-T) the button

calls up the electronic programme guide.

For DVD codes the button opens the title menu.

For VCR codes you can use the button for programming, if

your video recorder has a Showview / Videoplus function.

Universal functions (“Punch Through”)

The universal functions (also called “Punch Through”

functions) enable you to carry out certain functions on a dif

ferent device type than the programmed one. These are the

volume, mute and playback functions.

 If the remote control is in VCR, DVD, SAT or CBL mode,

the volume and mute keys () control the TV set (pro

vided the other devices do not have their own volume

control);

 if the remote control is in TV mode or in another mode wi

thout playback function, the PLAY, STOP, PAUSE, FAST

FORWARD/BACK, SKIP keys and perhaps RECORD will

actuate a connected video recorder, DVD player or DVD

recorder. The last selected device is actuated.

Programming the volume/mute universal functions

to another device type

In its delivered state, the universal remote control is pro

grammed in such a way that the volume and mute functions

automatically control the TV set if a source key for a device

with image transmission (DVD, video recorder) is pressed.

You can program the universal remote control so that the

universal functions Volume and Mute will actuate another

device type than the TV set.

1. Keep the

SETUP

key pressed down for approx. 3

seconds until the background lighting of the source key

will flash for a short time and then remain permanently

lit.

2. Press the key, until the source key extinguishes

briefly.

3. Press a source key for the device to which the volume

and mute functions should be transferred to. The light

for this source key will remain lit.

4. Press the key; the source key light will extinguish. If

you accidentally selected a device that does not have

its own volume control, the source key will flash for 3

seconds.

URC MD 81035 ML.book Seite 11 Mittwoch, 8. Februar 2006 12:35 12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Medion MD81035 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Medion MD81035

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info