Bedienungsanleitung Medisana BW 300 CONNECT pols (Seite 28 von 158) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Finnisch)

599211

Zoom out

Zoom in

Vorherige Seite

1/158

Nächste Seite

There are many factors that can influence blood pressure. Readings

can be affected seriously by stress, fear, heavy physical exertion or the

time of day at which the measurements are taken. Your personal blood

pressure values are subject to considerable fluctuation during the course

of the day and the year. These fluctuations are particularly pronounced

in the case of patients suffering from hypertension. Blood pressure is

usually at its highest during physical exertion and at its lowest at night

when you are asleep.

2.6 Fluctuations in blood pressure

Measure your blood pressure several times, then record and compare

the results. Do not draw any conclusions from a single reading. i

Your blood pressure readings should always be evaluated by a doctor

who is also familiar with your personal medical history. When using the

unit regularly and recording the values for your doctor, you should visit

the doctor from time to time to keep him updated. i

When taking readings, remember that the daily values are influenced

by several factors. Smoking, consumption of alcohol, drugs and phy-

sical exertion influence the measured values in various ways. i

Measure your blood pressure before meals. i

Before taking readings, allow yourself at least five minutes rest. i

If the systolic and diastolic readings seem unusual (too high or too low)

on several occasions, despite correct use of the unit, please inform

your doctor. This also applies to the rare occasions when an irregular

or very weak pulse prevents you from taking readings.

2.7 Influencing and evaluating readings

•

3 Getting started

Your MEDISANA Wrist blood pressure monitor BW 300 connect

features an integrated rechargeable battery, which enables a cordless

operation of your device. Before you can use your unit, the battery should

be charged fully. Therefore connect the included mini-USB-cable to the

USB interface on the device and to an USB-port of an active electric

utility (e.g. PC, laptop computer or mains plug with USB port etc.). i

Alternatively, you can charge the device with a special mains adaptor

(MEDISANA Art.-No. 51014) via the mini-USB-cable. During the charging

process, the display shows e.g. " " with some segments flashing.

When charging process is finished (" " is displayed constantly in full

without any segments flashing), disconnect the mini-USB-cable from the

device. If the "battery low"-symbol appears on the display (together

3.2 Charging the battery

•







The device has been set to a sleep mode for transportation. This sleep

mode has to be unlocked once before first use. Therefore press M - ,

Start - / Stop - and S - buttons simultaneously. The sleep mode

for transportation can only be activated by the factory.

3.1 Unlock transportation mode







2 Useful Information / 3 Getting started

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Medisana BW 300 CONNECT pols Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info