Bedienungsanleitung Medisana FSS 88245 (Seite 19 von 90) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Finnisch)

477200

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

3 Operation

3.1

Preparing

the appliance

• Make sure the power cord is disconnected from the socket.

• Make sure the facial sauna is standing on a level, secure surface (such as a

table).

• Fill the water tank



with tap water. Always use the measuring cup



;

never fill the tank directly from the tap.

• Do not use any liquids other than water.

• In hard water areas, it is advisable to fill half the tank with demineralised

(not distilled) water.

• Do not fill the water tank



higher than the maximum marking



• Fasten the steam attachment



(or



) to the main appliance



turning it clockwise until you hear it catch.

• When completely filled



the appliance can be used for up to 20 minutes

until the water has evaporated from the tank



• Plug the power cord into the socket.

• When the appliance is ready, switch it on using the ON/OFF button



. The

red indicator lamp



lights up. The water is heated and in a few minutes

steam comes out of it. You can switch the appliance off at any time using

the ON/OFF button



• Sit down in front of the appliance. Lean forward so that your face is over

the steam attachment



• Do not put your face too close to the steam attachment



; always keep at

a sufficient distance so that your skin does not become too hot.

• Do not use the steam attachment



for more than 20 minutes. If the ap-

pliance is used by several people in succession, each one should not use it

with the steam attachment



for more than 20 minutes in the course of a

day. Do not use the appliance more than two or three times per week.

• If the water has evaporated or if you want to switch the appliance off, press

the ON/OFF button



. The red indicator lamp



goes out.

• Unplug the power cord from the mains and let the appliance cool down for

at least 10 to 15 minutes before taking off the steam attachment



and

emptying the water tank.

• Take the steam attachment off the main appliance by turning it anticlock-

wise.

• Pour the remaining water out of the tank over a sink or basin.

• When you have finished using the sauna, wash your face with cold water.

Then apply your moisturiser to your face, or suitable cleaning or peeling

cream.

• You can turn the steam outlet plate



to regulate the amount of steam

coming from the water tank.

• To shorten the heating time, you can close the steam outlet plate



turning it clockwise as far as it will go.

• When the steam outlet plate



is closed, the steam escapes via the steam

valve



on the rear below the steam attachment.

• Never touch or cover the steam valve, as this can lead to scalding.

3.2

Using the steam

attachment

for your face

3.3

Adjustable

steam valve

88245_FSS_Gesichtssauna_NCL_West_FINAL.qxd:NewClassicLine 07.04.2011 9:12 Uhr Seite 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Medisana FSS 88245 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info