11
GB
2 Useful Informationon /
3 Operating
In order to be able to use your MEDISANA Medistyle A at all times, independent
of a mains supply, we recommend that you always leave the device on the
plugged in charging station
. The device cannot be damaged during
charging as it has an overcharge protection mechanism.
The rechargeable battery has enough loading capacity for a thorough mani-
cure or pedicure. However in order to avoid overheating, the device should be
turned off at the latest after 20 minutes’ constant use. It should then be left to
cool off for at least 30 minutes.
The MEDISANA Medistyle A is equipped with various attachments for manicure
and pedicure.
It can be used to:
• grind off dry callus skin,
• remove corns and plantar warts,
• grind off woody upper nail surfaces,
• file and polish nails and to,
• mill off ingrown nails.
There is an appropriate accessory for each function in the MEDISANA
Medistyle A care set. Should you require other accessories which are not
included in the scope of the delivery, a further selection is available within the
MEDISANA range.
The device is supplied with an accessory
already attached. In order to
change the accessories
, first remove the accessory not needed. Insert the
next part by turning it gently so that it is accommodated by the shaft
and
then press it down against slight resistance until it sits firmly on the shaft. If
you hear the engaging noise (a quiet “click”), the accessory is secure.
Press the ON/OFF switch
to turn the MEDISANA Medistyle A on. If pressed
for longer than 5 seconds, the device turns off automatically. This safety func-
tion hinders turning the device on by mistake, e.g. with a hard item in a toilet
bag.
The rotation speed of the device can be adjusted quickly and easily using the
three speed switch on the ON/OFF switch
:
After being switched on, the device runs at the slowest rate. The corresponding
control lamp
on the device indicates this. Press the ON/OFF switch
for a
moment to increase the speed to the middle level 2 (see control lamp
). Press
again to use the highest speed level 3 (see control lamp
).
To turn off the device, always increase the level to the highest speed level 3 and
then press the ON/OFF switch
again.
2.4
Period of use
3.1
Use
3.2
Changing the
accessories
3.3
Turning on and
off and adjusting
the speed
