Bedienungsanleitung Medisana MC 826 - 88926 (Seite 25 von 112) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Finnisch)

743105

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

3 Operating

3.2

Operation

Use the buttons on control pad to operate the massage seat cover:

• Switch on the device by pressing On/Off button

. The power LED

illuminates.

• The buttons

and

control the neck massage. You may

adjust the position and the rotation direction of the both massage

heads. The LEDs next to the buttons

and

indicate, which ro-

tating direction is active.

• The buttons

and

allow a Shiatsu- or tapping

massage for the back area. With the button

you may activate a

spot massage (only with tapping massage).

• When the “Upper Back” massage button

is pressed, the LED

next to the button illuminates and the Shiatsu massage heads

move from the “Park” position at the base of the backrest, up to the

shoulder area, massaging the back in a circular motion whilst doing

so. Once the uppermost position has been reached, the direction of

rotation of the massaging heads is reversed. The heads then travel

down to the centre of the back. Once the heads reach this point, the

direction of rotation is reversed again and then travel up the back

again. If you press button

during the massage, this function is

switched off and the massage heads remain stationary in their cur-

rent position.

• If you press the “Lower Back” massage button

, the LED next to

the button illuminates. The Shiatsu massage heads

travel up and

down the lower half of the back in a circular motion. The reversal of

the direction of rotation takes place when the respective end posi-

tions are reached. Pressing button

during the massage, switches

off this function and the massage heads remain stationary in their

current position.

• If you press the “Full Back” massage button

the function proce-

dure is similar to pressing buttons

and

, except that it is for the

entire back.

• To activate a tapping massage for the selected back area, press

the button

. By repeatedly pressing this button, you can change

the tapping massage mode (mode 1 = constant massage, mode 2

= massage with pauses, mode 3 = alternating mode 1 and mode 2

with change of moving direction). If mode 3 is active and you press

the button

again, the tapping massage will be switched off.

• The button

(level) controls the intensity of the tapping massage.

A press on the button

increases the intensity (2 = medium inten-

sity). A second press on the button

increases the intensity again

(3 = high intensity). After button is pressed a third time, the tapping

massage intensity is set back to intensity 1.

• During the tapping massage, press button

to activate spot mas-

sage.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Medisana MC 826 - 88926 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info