Bedienungsanleitung Medisana MTX 51080 (Seite 39 von 182) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Schwedisch, Finnisch)

477213

Zoom out

Zoom in

Vorherige Seite

1/182

Nächste Seite

4 Operation

On the display, you can see



(average) and “ 1 “ for the first

measurement.

2. Next, the sleeve



automatically inflates until the pressure required for a

measurement has been reached. Alternatively, you can create this pressure

manually by pressing and holding the START button



after the device

has automatically reached a pressure of at least 30 mmHg. When you think

that the device has reached the ideal starting pressure for a measurement,

release the START button



. The increasing pressure is displayed numeri-

cally.

3. The measuring process begins automatically when inflation is complete by

releasing the pressure built up in the cuff. The display shows the current

pressure in the cuff.

4. Initially, deflation occurs at a constant speed. The pulse symbol



ap-

pears on the display. As soon as the pulse can be determined, deflation is

synchronised with the beating of the heart until the measurement ends.

The device beeps for each heartbeat during this procedure, if you did not

switch off the beep function beforehand. At the same time, the pulse

symbol



flashes.

5. The first measurement ends when the pressure has been completely dis-

charged from the sleeve during a 15 second countdown. The countdown

symbol



flashes during this process. Beeps sound during the last 5 sec-

onds.

6. Instead of “ 1 “, the display now shows “ 2 “ for the second measurement.

The second measurement proceeds in the same way as the first (see points

2 - 5).

7. Instead of “ 2 “, the display now shows “ 3 “ for the third measurement.

The third measurement proceeds in the same way as the first (see points

2 - 4).

8. Once the 3MAM measurement has been taken, the sleeve suddenly de-

flates and a longer beep sounds.

9. The measured values





and



are shown on the display, together

with the WHO blood pressure bar display



. At the same time, a longer

beep sounds.

10. If the unit detects an arrhythmia during the measuring process, the arrhy-

thmia symbol



will flash eight times while the reading is displayed.

You may also hear 8 short beeps; these warn the user of an irregular heart-

beat.

11. If you do not press any buttons for approx. 1 minute, the device automat-

ically switches to standby mode.

NOTE

When the device is used, the errors Err 1, 2, 3, 5, 6 can occur in

the integrated circuit. Err 6 can only occur in 3MAM mode.

In 3MAM mode, errors Err 1, 2, 3, 5 do not cause the

measurement to be cancelled, unless they occur twice in

succession. The error display is always accompanied by 3 short

beeps.

51080_MTX_West_FINAL_akt.qxd:Blutdruckmessgerät 10.09.2009 11:16 Uhr Seite 29

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Medisana MTX 51080 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info