14
3 Operating
GB
Use the buttons on control pad
to operate the massage seat cover:
•
Switch on the device by pressing On/Off button
. The blue power LED
illuminates.
•
When the “Upper Back” massage button
is pressed, the green LED next
to the button illuminates and the Shiatsu massage heads
move from the
“Park” position at the base of the backrest, up to the shoulder area,
massaging the back in a circular motion whilst doing so. Once the uppermost
position has been reached, the direction of rotation of the massaging heads
is reversed. The heads then travel down to the centre of the back. Once the
heads reach this point, the direction of rotation is reversed again and then
travel up the back again. If you press button
during the massage, this
function is switched off and the massage heads remain stationary in their
current position.
•
If you press the “Lower Back” massage button
, the green LED next to
the button illuminates. The Shiatsu massage heads
travel up and down the
lower half of the back in a circular motion. The reversal of the direction of
rotation takes place when the respective end positions are reached. Pressing
button
during the massage, switches off this function and the massage
heads remain stationary in their current position.
•
If you press the “Full Back” massage button
the function procedure is
similar to pressing buttons
and
, except that it is for the entire back.
•
You can enhance the shiatsu massage at any time with a vibration massage
for your thighs by pressing the vibration massage button
.
• The
vibration massage in the upper thigh area can be operated separately by
pressing vibration massage button
. The green LED next to the button
illuminates and both vibration massage motors
are switched on. They
begin with a gentle massage. Press button
again and the vibration level
increases (medium intensity massage). Press button
a third time and the
vibration level increases (highest intensity massage). After button
is pressed
a fourth time, the vibration massage is switched off and the green LED next
to the button extinguishes.
•
The heat function can be activated at any time with the shiatsu massage,
during which the vibration massage can also be activated. Press the infrared
heat button
to activate the function; the red LED lights up. The heat is
radiated through the massage heads
. Press the button
again to de-
activate the heat function; the red LED goes out.
•
To switch off the device: Press the On/Off button
. The blue power LED
begins
to flash and the massage heads travel back down to the “Park”
position. When this position is reached, the blue LED extinguishes. If you press
the
On/Off button
when one of the massage functions is switched on, the
vibration motors just stop immediately. First the massage heads travel
downwards to the “Park” position. The blue LED flashes meanwhile and then
extinguishes.
•
After each use, switch the device off using the On/Off switch
and remove
the plug
from the mains socket. Always store control pad
in its bag
.
