477209
40
Zoom out
Zoom in
Vorherige Seite
1/154
Nächste Seite
GB
34
Application
With the controls (channel 1, left connection) and (channel 2, right con-
nection) you set the current intensity from 1 to 60 mA in increments of 1 mA.
Increase the current intensity: Turn the control up.
Reduce the current intensity: Turn the control down.
The current strength appears on the display panel with the large numbers
(channel 1) and (channel 2). When the current is activated, the therapy time
starts counting down.
Carefully increase the current intensity until you notice a tingling sensation from
the applied current. Observe the instructions of your doctor or therapist in the
process.
For pain relief, only increase the intensity so that it is still pleasant. The cur-
rent should not in any case be painful.
To relax your muscles, increase the intensity until slight twitching under or
around the electrodes results. In no case, should the tensing of the muscles
be painful.
Stop using the device if it is no longer pleasant or if you experience pain.
Automatic deactivation
The device will deactivate the current from a current intensity of 10 mA if the
electrodes are not properly applied to the skin or are not connected at all.
Automatic locking
If you do not operate the unit for 10 seconds after beginning the therapy, the
display panel light will deactivate and the control elements will be locked to
prevent accidental changes to the settings. The lock is indicated by the key
symbol
” next to the program number.
To unlock the device, push the button P” for approximately three sec-
onds.
You can interrupt therapy in progress at any time (also when the device is
locked) by pushing the button ”.
The program will stop automatically once the therapy time has elapsed.
Turn off the device by brie y pressing the button
”.
Remove the electrodes, if applicable, clean them (see page 47) and stick
them back on the carrier paper.
Select the cur-
rent intensity
End
therapy
40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Medisana TDP 88310 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info