Bedienungsanleitung Medisana WL 460 - 45115 (Seite 18 von 82) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Finnisch)

743149

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

3 Operation

With the Alarm-button you activate alarm1 and/or alarm 2. Depending

on the rate of keystrokes, AL1 (for alarm1) and/or AL 2(for alarm 2) are

displayed and are activated therewith. With the fourth press on the Al-

arm-button all alarms will be deactivated. G

In the last 30 minutes before an activated alarm starts, the brightness

slowly adjusts to the brightness set for the alarm time. The volume selec-

ted for the alarm time, increases from the start of the alarm (when the

alarm time is reached) to the set value within 60 seconds. The regular

alarm is only activated, if there are more than 30 minutes between the

time when the alarm is set and the time at which the alarm is supposed to

be triggered. If there is less than 30 minutes between the time when the

alarm is set and the time at which the alarm is supposed to be triggered,

the alarm function will start 60 seconds before the setting time. Pressing

the Off button switches off the alarm - the settings will be kept for the

next day. The alarm automatically switches off after 30 minutes.

3.6

Activate an

alarm

With the Zizz-button you can set a short time alarm (e.g. for taking a

short break). Pressing the button once sets an alarm to begin after 15

minutes. Each further press of the button extends the alarm time by 15

minutes (until max. 90 minutes). It starts the countdown to the desired

alarm time once the icon stops flashing. G

Pressing the Off button switches off the alarm. The alarm automatically

switches off after 30 minutes. G

3.7

Short time

alarm

With the Demo / Snooze / Quick Check-button you can select differ-

ent functions depending on the current state of the device settings:

1. In case of deactivated alarm:

Demonstration function for all light and sound effects. The entire demo

process takes about 1 minute.

2. In case of set / activated alarm function:

Quick-Check function to check the settings of the alarm function. After dis-

play of all values, the Quick-Check function will be closed automatically.

3. In case of activated and effected alarm:

Snooze funcion. When the button is pressed within 30 minutes before

the set alarm time, the wake up function (including light and sound) will

stop until the setting time.

3.8

Demo /

Snooze /

Quick Check

3.5

Night light

By pressing button you activate the red night light (sunset) for 30

minutes. If you press button again the timer will be set to 60 , resp. 90

minutes. Pressing button the fourth time will deactivate the night light.

While the night light function is activated you can press button to see the

remaining time.

Then it takes only 1 minute for light and sound to reach the setting de-

gree. If you press the Demo / Snooze / Quick Check-button within

30 minutes after the setting time, the device will wake up after 5 minutes

delay. Each time pressing the button stops the wake up function for fur-

ther 5 minutes. The maximum to extend the alarm time is 30 minutes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Medisana WL 460 - 45115 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info