Bedienungsanleitung Meliconi fully 8 (Seite 2 von 4) (Englisch)

122865

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

INSERTING THE BATTERIES

The remote control requires 2 new 1.5V alkaline AAA/LR03 batteries.

Insert them as illustrated.

Try pressing a number button and check that the red light remains lit

continuously until you release the button: if the light ﬂ ashes, the batteri-

es inserted are not charged and are about to go ﬂ at, therefore you must

substitute them.

Do not leave ﬂ at batteries inserted, as liquid may leak and damage the remote control

The Fully 8 RC remote control is a universal remote, so its memory contains data relating to numerous devices of various

brands available on the market.

Each original device has a speciﬁ c code which must be used to set up the remote control.

Therefore, to use your Fully 8 RC you must enter the speciﬁ c code for each device you wish to control.

So use one of the following methods to identify the correct code and set it in your remote control:

A) - INTERNET (recommended)

B) - CELL PHONE (SMS)

C) - MANUAL SEARCH

SETTING CODES

If you have an Internet connection available, follow the on-line guide on the www.meliconi.com/guida website to identify

the speciﬁ c codes for the devices you wish to command. Then set the codes manually in your MELICONI remote control

as described in the ENTERING THE CODE DIRECTLY procedure.

SETTING CODES USING INTERNET

Today, Meliconi gives customers who don’t have internet the chance to receive the codes for programming their remote

control directly on their cell phone.

Simply send an SMS to this number 0039 345 7518893 as follows: 8A, Type, Brand, Model

- Type = indicate the device to be controlled using one of the following abbreviations: TV - SAT - DVD - VCR - TER

(Digital Terrestrial decoder) - AUX (other audio video device).

- Brand, Model = to indicate the brand and the model of the device to be controlled.

Example: 8A, TV, PHILIPS, 32PFL3614 (if you don’t know the model, don’t write anything after the brand).

Once you have received the SMS with the list of codes, set the ﬁ rst code in the remote control as described in the

ENTERING THE CODE DIRECTLY section.

Stand in front of the device with the MELICONI remote control. Turn the device on and then press the OFF button on the

remote (or the PLAY button if the device is a VCR/DVD).

If the device does NOT switch off (or if the VCR/DVD does not start playing), try setting the consecutive code in the SMS

list in the remote control.

When the device reacts check whether the other buttons are operating correctly too.

If they do, the remote control is ready to use.

If they don’t, you are probably using an incorrect code destined for a very similar device; at this point ignore the

SMS list and consult the SETTING CODES USING A MANUAL CODE section to ﬁ nd a more suitable code.

SETTING CODES USING A CELL PHONE

NOTE: If you don’t receive an SMS on your cell phone or if the message says ERROR / NO CODE, it means the

system has not been able to process the data you have sent; Do not try sending another SMS use the MANUAL

SEARCH instead.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Meliconi fully 8 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info