Bedienungsanleitung Meliconi universal 4 (Seite 4 von 6) (Englisch)

122407

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

You can also use the TV - VCR - SAT - DVD selection buttons for different appliances.

See the table below.

used communicates the code by

flashing the three numbers separately.

Count the number of flashes for each

code number. For example, for the

code 306, the button flashes three,

zero and six times to give:

= 3

= 0

= 6

Note this code on the label inside the

battery cover, for rapid consultation.

NOTING THE PROGRAMMED CODE

To find the code for your remote control:

Press one of the TV - VCR - SAT - DVD

selection buttons for the appliance

whose code you want to identify.

Hold down the SHIFT and ON/OFF

buttons together until the TV - VCR -

SAT - DVD selection buttons start to

flash.

Release the SHIFT and ON/OFF

buttons and then press and release

the 1-/— button.

After a few seconds, the TV - VCR -

SAT - DVD/AUX selection button you

USING THE ADDITIONAL COMMANDS WHICH DO NOT

APPEAR ON THE KEYPAD

Although not indicated on the keypad, some buttons can be used for additional commands.

1. Use your Universal 4 remote control to find them by pressing the following buttons one by

one:

2. The most frequently used additional commands like MENU SCROLL – COLOUR –

BRIGHTNESS and NORMALISATION are located as follows:

normalisation

menu (up) menu (up) + brightness (-) red brightness (-) + red

menu (down) menu (down) + brightness (+) green brightness (+) + green

menu (right) menu (right) + color (-) yellow color (-) + yellow

menu (left) menu (left) + color (+) blue color (+) + blue

USING THE REMOTE CONTROL WITH MORE THAN ONE

APPLIANCE OF THE SAME TYPE

VOLUME CONTROL AVAILABLE AT ALL TIMES

If you have programmed the Universal 4 remote control for the TV using

the TV selection button and for the VCR using the VCR selection button,

you can raise or lower the TV volume or use the mute function while watching

the VCR without having to press the TV selection button.

1-/--

OK AV

SHIFT

1-/--

DVD

SAT

VCR

SAT

DVD

BUTTONS

APPLIANCES

TV VCR SAT DVD

√√√

√√√√

In this way, you can obtain all the

combinations required, simply program

the remote control as follows:

Always write down the 3-digit code for your remote control on the label inside the

battery cover after running the search and saving the code.

This may be useful if you need to reprogram your remote control in the event of

accidental cancellation or when you change used batteries.

If you forget to write down the code or use the remote control programming

procedures A or C ... don’t worry!

One at a time, search for the codes

for each appliance, following any

of the programming procedures

A , B or C described above.

Make a note of the various

appliance codes.

Enter the codes, following the

programming procedure B

from point 3 and assign the

appliances to the selection

buttons as you like.

SHIFT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Meliconi universal 4 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info