NOTE:Onlyusetheappliancefora
maximum of three minutes at a time. If the
appliance has been running for more than
3 minutes, leave it to cool down before you
use it again.
Use of grater function
1. Make sure that
the On/Off
button is set to
“0” (off).
2. Fit the
attachment
holder (16) onto
the drive shaft
in the middle
of the plastic
bowl with the
attachment pin
(15)facingupwards.Makesurethatitis
pressed down as far as it will go.
3. Fit the grater attachment (14) on the
attachment holder with the selected
blade up.
o The long blade (17) is for grating or
slicing foodstuffs depending on their
consistency.
o The small curved blades (18) are
for grating or shredding foodstuffs
depending on their consistency.
4. Place the lid (13) on the appliance, and
turn counterclockwise, so that the pin
(9) clicks into place in the safety lock
(3).
oMakesurethatthelidtstightly.
oNOTE:Thesafetylockensuresthat
the appliance cannot be turned on
if the lid or the safety lock pins are
notttedcorrectly.
5. Placeabowlunderthespout(21)
to collect the foodstuffs as they are
expelled from the appliance.
6. Insert the plug (7) in the mains socket
and switch on the power.
7. Switch on the apparatus by switching
the on/off button to one of the following
settings:
o "CHOP" (lowest speed)
o"SLICE/SHRED"(highestspeed)
o"GRIND"(theapplianceonlyruns
as long as the On/Off button is held
at this setting).
8. Addfoodstuffstotheappliancethrough
the funnel (20).
o If necessary, use the tamper (12)
to press foodstuffs down into the
appliance.
o The tamper can also be used as a
plugtokeepjuicesfromspraying
out of the appliance.
9. Turn off the appliance by turning the
On/Off button to “o” and remove the
plug from the socket.
Wait until the blade has come to a
complete stop before removing the lid.
NOTE:Onlyusetheappliancefora
maximum of three minutes at a time. If the
appliance has been running for more than
3 minutes, leave it to cool down before you
use it again.
Storage
• Ensuretheapplianceiscleananddry
before storing.
• Theappliancecontainssharpparts
- keep out of the reach of children.
CLEANING
• Removeplugfromthemainssocket,
and allow the appliance to cool down
before cleaning it.
• Themotorsectionmustnotbe
submerged in any form of liquid.
• NOTE:Donotputanypartofthis
applianceinthedishwasher!
• Cleantheappliancebywipingitwith
adampcloth.Alittledetergentcanbe
added if the appliance is heavily soiled.
• Neveruseascouringpad,steelwoolor
any form of strong solvents or abrasive
cleaning agents to clean the appliance,
as those may damage the outside
surfaces of the appliance.
• Theplasticbowlandattachmentscan
be washed with ordinary soapy water.
• Becarefulnottotouchthesharpedges
oftheblades!
FOR UNITED KINGDOM ONLY
Plug wiring:
ThisproductisttedwithaBS1363
13-amp plug. If you have to replace the
fuse,onlythosethatareASTAorBSI
approved to BS1362 and with a rated
current of 13 amps should be used. If there
isafusecovertted,thiscovermustbe
rettedafterchangingthefuse.Ifthefuse
cover is lost or damaged, the plug must
not be used. You must also check if
thesocketoutletsinyourhometwiththe
plug of the appliance. If the socket outlet
inyourhomedoesnottwiththeplug,
the plug must be removed and disposed
of safely as insertion of the plug into the
socket is likely to cause electric hazard.
AsthisproductisaclassIIappliance,the
pin of BS plug for earth
connection is false.
