15
• Iftheappliance,cordorplughavebeen
damaged, have them inspected and if
necessary repaired by an authorised repair
engineer.Nevertrytorepairtheappliance
yourself. Please contact the store where
you bought the appliance for repairs under
theguarantee.Unauthorisedrepairsor
modifications to the appliance will invalidate
the guarantee.
KEY TO MAIN COMPONENTS OF THE
APPLIANCE
1. Pouring spout
2. Blender glass with scale
3. Motorsection
4. On/Offbutton
5. Blender glass lid
6. Cap
7. Blade
8. Blade unit
PRIOR TO FIRST USE
• Beforeusingforthefirsttime,orafter
prolonged storage without use, wash any
parts that will come into contact with food.
• Sparecordcanbewrappedaroundthe
cord storage holders at the bottom of the
appliance.
USING THE APPLIANCE
1. Placethemotorsection(3)onalevel
surface, e.g. a kitchen counter, and make
sure it is standing firmly on the four suction
cups underneath.
2. Assemblethebladesection:Turntheblade
unit (8) upside down, place the sealing ring
inside the unit, and fit the blade in the unit.
3. Screwthebladesectionontothebottomof
the blender glass.
4. Fit the blender glass on the drive shaft of
the motor section, and turn it slightly, until it
locks into place.
5. Lifttheblenderglasslid(5)(canbeabit
tight).
6. Pour food into the blender glass.
oNOTE!Neveraddliquidorfoodabove
the “1,000 ml” mark on the blender glass.
7. Fit the lid onto the blender glass, so the
curved edge is over the pouring spout (1).
First, push the rear of the lid into the glass
next to the handle, and then push down the
front of the lid next to the pouring spout.
Ensurethelidisfirmlypressedintoplace.
8. Place the cap (6) in the hole in the lid and
turn it until it locks into place.
9. Plug in and switch on the power.
10. Place a hand on the lid and switch on the
appliancebyturningtheOn/Offbutton(4)to
“1” (low speed) or “2” (high speed).
11. The appliance also has a pulsing option with
extra speed.
oTurntheOn/Offbuttonto“P”andholdit
briefly in that position.
o When you release the button, it reverts to
“0” and the appliance stops.
12.Youcanaddmorefoodtotheblenderglass
during operation through the opening in the
lid.Alwaysswitchofftheappliancebefore
removing the cap and adding more food.
13.TurnofftheappliancebyturningtheOn/
Offbuttonto“0”whenyouhavefinished
blending. Wait until the blade has come to a
complete stop before removing the lid.
NOTE!
• Donotleavetheappliancerunningnon
stop for more than 2 minute at a time. If the
appliance has been running for 2 minute,
allow it to cool down for 2 minute before you
use it again.
• Alwaysaddliquidtotheblenderglasswhen
crushing ice cubes.
CLEANING
When cleaning the appliance, you should pay
attentiontothefollowingpoints:
• Removeplugfromthemainssocket,and
allow the appliance to cool down before
cleaning it.
• Donotimmersethemotorsectionofthe
appliance in water and make sure no water
enters the appliance.
• Cleanthemotorsectionbywipingitwitha
dampcloth.Alittledetergentcanbeadded
if the appliance is heavily soiled.
• Neveruseascouringpad,steelwoolorany
form of strong solvents or abrasive cleaning
agents to clean the appliance, as those
may damage the outside surfaces of the
appliance.
1.
2.
3.
4.
5.
6.
7.
8.
