36
UK
USE
Dry ironing
• The appliance can be used for dry
ironing, even if there is water in the
water reservoir.
• Turn the steam adjustment button (3)
to position 0.
• Turn the thermostat (8) to the
required temperature setting. The
indicator light will come on.
• Once the indicator light goes out,
the required temperature has been
reached and you can start to dry iron.
• Do not fill the appliance with water
if it is to be used as a dry iron for a
prolonged period.
Steam ironing
• The appliance can be used for steam
ironing when the thermostat is turned
to the highest temperature range.
• Fill with water. Turn the thermostat (8)
to the required temperature setting.
The indicator light will come on.
• Once the indicator light goes out,
the required temperature has been
reached and you can start to steam
iron.
• The steam shot function for
smoothing out stubborn creases can
only be used when the thermostat
is turned to the maximum setting
(MAX). Press the steam shot button
(1) to spray steam onto the garment
through the holes in the soleplate.
Water spray
• Press the water spray button (2) to
spray water out of the nozzle (5) on
the front of the appliance. Please note
that you may have to press the button
a few times to get it to work.
Self-cleaning function
The steam iron must be cleaned at regu-
lar intervals, depending on the hardness
of the water and how often the appliance
is used.
• Fill with water to the MAX mark.
• Turn the steam adjustment button (3)
to position 0.
• Turn the thermostat to the highest
setting (MAX).
• Plug the appliance in and allow it to
heat up until the indicator light goes
out.
• Hold the iron horizontally over a sink.
• Remove the plug from the socket.
• Hold the self-clean button (7) down.
Boiling water and steam will be
emitted from the soleplate, washing
out all the limescale deposits. Move
the iron back and forwards over the
sink at the same time.
• Release the self-clean button once
the water reservoir is empty.
• Allow to cool down before putting it
away.
