Bedienungsanleitung Melissa 641062 (Seite 15 von 24) (Deutsch, Englisch, Dänisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

507943

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

USE

Filling with water (for steam ironing)

Setting the temperature

Select the required iron temperature

using the thermostat knob:

Wool, silk

Nylon

Cotton or linen

Place the steam iron on its end, so it

stands upright. Plug in and switch the

power on.

Do not start ironing until the indicator

light (5) goes out. The indicator light

switches on and off during ironing,

as the thermostat regulates the

temperature of the steam iron.

If you turn the temperature up using

the thermostat button, you should not

start to iron until the indicator light

goes out.

Steam ironing

Steam ironing is only possible at high

temperatures. Do not use steam ironing

when the thermostat knob is at position

rom the

soleplate, because the steam iron is not

hot enough to convert all the water to

steam.

Check that there is sufficient water in

the reservoir.

Set the thermostat knob to the

requir .

Plug in. Start ironing when the

thermostat light goes out.

pressed, it is equivalent to setting the

steam ironing function to "off" mode.

Then there is no steam released from

the sole plate.

original position. This is

the steam ironing function to "on" mode.

Then the steam will be continuously

released from the sole plate.

Dry ironing

You dry iron in the same way as you

steam iron, except the steam setting

selection knob must be in position 0.

Tips!

Always stand the iron upright if you

take a break from ironing!

Always iron synthetic fabrics and silk

on the reverse. This avoids shiny spots

on the fabric.

Wool products (100% wool) may be

pressed when the steam iron is set to

steam position. We recommend using

the setting for maximum steam, with a

layer of dry fabric between the steam

iron and the item to be ironed.

Make sure that the steam iron is

unplugged from the electrical outlet.

Make sure that the steam button +

temperature button is in position MIN

before filling with water.

Fill water in the water tank through the

water tank lid, until the water reached

the max mark indicated on the side of

the iron. Never fill above this mark.

Pour out the remaining water after use.

Do not use chemically descaled water.

KEY

1. Spout for water filling

2. Knob for selecting the steam setting

3. Handle

4. Cord

5. Indicator light

6. Thermostat knob

7. Soleplate

8. Mark for maximum water level

PRIOR TO FIRST USE

Remove the protective film from the

soleplate (7).

Some parts of the steam iron were

oiled during manufacture and these

will therefore smoke slightly when the

iron is first used. This is entirely safe,

and the smoke will disappear once the

steam iron has been used a few times.

Test it on a piece of material or similar

before using it on clothes.

1. 2.

equivalent to setting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Melissa 641062 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info