Bedienungsanleitung Melitta AROMAFRESH Therm (Seite 9 von 56) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

713059

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Please note:

•Waterhardnesscannotbeprogrammedwhilebrewing.

•Thelastwaterhardnesslevelchosenremainseven

after removing the power cable.

4. Coffee preparation

For aromatic coffee flavour and the best fit of your

coffee filter in the filter holder we recommend using

Melitta

coffee filters size 1x4

•Ensurethatthepowercableispluggedin.

•Openthelidonthewatertank.

•Fillthewatertank.Theremovabletankcanbelled

directly at the tap. Alternatively use the insulated jug

to pour the water into the tank in the appliance . The

required amount of water can be seen on the water

level indicator on the tank.

•Closethewatertanklidandplacetheinsulatedjug

with closed lid in the appliance.

•Setthenumberofcups to the amount of water

in the water tank . The number of cups is shown

in the display .

Note: Ensure that the selected number of cups

corresponds to the amount of water in the water

container . Please note that when making coee

all the water in the water tank is used. If the

number of cups and the amount of water do not

correspond to each other then this can lead to you

not getting the coee ﬂavour you would like.

4.1 Using coffee beans

•Whenthebeancontaineriscompletelyfull,youcan

brew enough coee for 10 cups 2 or 3 times. Roast-

ed coee beans lose their ﬂavour. Only ﬁll coee

beans in the container which will be used within a

few days.

•Openthebeancontainerlidandllwithcoee

beans . Then close the lid.

Note: To ensure the grinder functions perfectly

do not use caramelised coee beans. Do not put

ground coee in the bean container.

•Opentheswivellter to the left.

•FoldaMelitta

1x4

coee ﬁlter at the embossed

seams and place it in the ﬁlter holder . Use your

hand to press the ﬁlter in to ensure the best ﬁt.

•Swivelthelterbackintotheappliance.Anaudible

click indicates that the ﬁlter is in place.

•Turnthegrinddial, to select the required grind

level (from ﬁne to coarse). The grind dial allows you

to select from 3 dierent settings. Settings between

the symbols are also possible. The ‘ﬁne’ setting is

for standard coee. This setting may give the coee

a slightly bitter character. If a coarser setting is

selected the coee will be less bitter.

•Pressthebuttontoselectcoeestrength. The

selected coee strength is shown in the display .

One coee bean is for mild, two beans for

medium and three beans for strong.

•TurntheapplianceonusingthestartbuttonON/

OFF . Coee preparation begins and the green

LED ﬂashes.

Note: The appliance has an overload safety function

of the grinder, which protects the grinder against

damage by foreign objects in the coee beans. If you

hear a loud chattering, unknown noise during the

grinding process, switch the appliacne o  and

clean the grinder as described in point 7.

•Thedripstop prevents coee dripping when you

Hardness

setting

I II III IV

°dH

<7°

7-14°

14-21°

>21°

Display 

2 3 4

for stirring or cleaning and

do not ﬁll with ice cubes or

carbonated liquids.

•Donotsubjecttheglassaskto

high temperature ﬂuctuations.

2. Before rst use

• Ensure that the mains voltage in your home corre-

sponds to that indicated on the identiﬁcation label

on the base of the appliance.

•Connecttheappliancetothemainspower.Cable

which is not required, can be stored in the cable

spool .

•Setthecurrenttimeusingthebuttons‘h’and‘m’.

It is possible to speed this up by holding in the

respective button. The display light can be turned

on or o by holding down the h and m buttons 

for longer than 2 seconds.

•Allappliancesaretestedforfaultfreeoperation

when they are produced. Some residual water may

be left behind after this test. Rinse the appliance

twice with the maximum amount of water without

a coee ﬁlter or ground coee in order to clean it.

To do this, ﬁll the water tank  up to the 10 cup

level marker, then press the setting for using ground

coee  and turn the appliance on .

•The appliance has a variety of features for the best

coee enjoyment and ease of use. These features

are explained below.

3. Set water hardness

Depending on water hardness lime scale may build up

in the appliance. This increases the appliance’s energy

consumption as lime scale on the heating element

can prevent the water heating eectively. To avoid

damage the appliance must be descaled regularly. The

descaling display helps you in this. If the CALC-button 

is permanently lit this shows that the appliance needs

to be descaled.

The appliance is pre-set for a high level of water

hardness (level 4). You can ﬁnd out the level of water

hardness in your area by asking your local water

provider or by using water hardness measuring strips

available in the shops. For softer water the descaling

display can be adjusted to descale less often.

•HolddowntheCALC-button and by brieﬂy

pressing the m-button  set the desired level of

water hardness. The hardness setting will then

show in the display

•Onceyouhavesetthedesiredlevelofwater

hardness, let go of the CALC-button.

Your settings are now saved.

•Thesettingsanddisplayareshowninthetable.

Melitta AROMAFRESH Therm Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info