Bedienungsanleitung Melitta Avanza (Seite 49 von 344) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

712198

Zoom out

Zoom in

Vorherige Seite

1/344

Nächste Seite

Care and maintenance

1. Open the cover (11). To do this, reach

into the recess on the right of the appli-

ance and pull the cover o sideways.

2. Press and hold the red lever(30) on the

brewing unit handle(12) and turn the

handle clockwise until it engages at the

stop.

3. Pull the brewing unit out of the appli-

ance by the handle.

4. Rinse the entire brewing unit thor-

oughly from all sides under running

water. In particular, make sure that

coee residues are removed from the

sieve(31).

5. Allow the brewing unit to drip dry.

6. Use a soft, dry cloth to remove coee

residues from the surfaces inside the

appliance.

7. Insert the brewing unit into the appli-

ance. Press and hold the red lever on

the handle of the brewing unit and

turn the handle anticlockwise until it

engages at the stop.

8. To do this, insert the cover sideways

until it engages.

When the appliance is switched on, an

alternating ashing of the Ready display

and the Clean display indicates a missing

brewing unit. After the brewing unit has

been inserted, the appliance switches to

Ready mode.

7.4 Running the cleaning

programme

This cleaning programme is used to

remove residues and coee oil residues

with the aid of fully automatic coee

maker cleaning agents.

To avoid damage to the appliance, we

recommend running the cleaning pro-

gramme every 2 months or as requested

by the appliance.

The Clean display light requests

you to clean the unit.

CAUTION

Contact with fully automatic coee

maker cleaning agent may lead to eye

and skin irritation.

 Observe the processing instructions on

the packaging of the fully automatic

coee maker cleaning agent.

ATTENTION

The use of unsuitable fully automatic

coee maker cleaning agent can damage

the appliance.

 Only use Melitta® PERFECT CLEAN

cleaning tablets for fully automatic

coee machines.

The cleaning programme takes approx.

15minutes and should not be interrupted.

The cleaning programme runs in several

stages. Progress is indicated by the num-

ber of coee beans displayed.

The appliance performs several rinsing

operations during the cleaning pro-

gramme. The drip tray is also rinsed.

Requirement: The appliance is ready for

operation.

1. Press the "Service" button for

more than 2seconds to call up Service

mode1.

2.  Press the "Service" button

repeatedly until the display for the

cleaning programme appears.

3. Press the "Service" button for

more than 2seconds to start the

cleaning programme.

» The Clean display ashes

until the cleaning programme is

nished.

The rst stage of the cleaning pro-

gramme starts. One coee bean lights up.

» The Drip tray display lights

up and requests you to empty the

drip tray and the coee grounds

container.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Melitta Avanza Seite 49

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info