Bedienungsanleitung Melitta caffeo n 66 e 911 (Seite 14 von 47) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Schwedisch)

362055

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

23 24

Making coffee...

8.2 ...with ground coffee

With the appliance ready for use, turn the

coffee bean container (2) to the position for

ground coffee operation, Fig. G. The brewing

strength display is extinguished.

Should there be any beans in the ground

coffee chute (1), they will be stuck between

the housing and the ground coffee chute. You

can remove these beans by setting the bean

selector switch to the mid-position and

removing the coffee bean container (2),

Fig. H, I.

Take off the chute lid for ground roasted coffee

and put in fresh ground coffee.

Use a level scoop to dose for one or two cups

of coffee.

Dose to select the desired brewing strength.

Pointer: Fig. J Never put in more than 2 level

scoops of ground roasted coffee so as not to

overfill the brewing chamber. Only ground

coffee may be used. Instant coffee might clog

up the brewing unit.

Replace the lid on the chute. 1 or 2 cups

can be selected by turning the function

controller (21). Selection determines whether

the “1 or 2 cup symbol” lights up. Now place

the cup or cups under the height-adjustable

coffee outlet (13), Fig. F.

Any quantity of water between 15 – 200 ml

can be set. Select the quantity of water

(according to the bar display (24)) using the

water quantity regulator (20). The water

quantity bar rises when the water quantity

regulator is turned in a clockwise direction.

After making your selection, press the start

key (23). Re-pressing the start key will stop

coffee being dispensed.

Making coffee...

8.1 ...with coffee beans

When the appliance is ready for operation,

turn the coffee bean container (2) to the

position for coffee-bean operation, Fig. D.

Remove the coffee bean container lid and fill

with fresh beans. Only fill the container with

coffee beans and no higher than a max. of

1 cm under the rim of the container. This is

to stop the container possibly spilling when

adjusting for the bean type.

Tip: This appliance is fitted with the Bean Select

two-chamber bean container. Each chamber

can hold some 100 g of coffee beans. To enjoy

the full variety, fill one chamber with e.g.

espresso beans and the second one with café

crème beans. You can mark the kind of coffee

by placing the supplied sticker on the bean

container.

Then firmly replace the lid on the container.

Select the desired coffee by setting the bean

container switch (3) appropriately. The bean

selector switch points to the chamber

supplying the beans.

Pointer: Fig. E When setting the bean selector

switch, the shape of the coffee beans might

cause some beans to get stuck. These beans

can be freed and the knob shifted by turning

the bean selector switch again and moving the

beans about in the container. If the bean selector

switch is set in a vertical position when brewing,

this will prevent beans from getting into the

grinder. The result will be a watery coffee.

Since some coffee beans always remain above

the grinder, switching over to a different bean

type produces intermixing in the first cup of

coffee.

If you want to be sure of getting a pure cup of

coffee, we would advise brewing a small cup

of coffee first and throwing it away. The second

cup after switching over will then be exactly as

requested – this is particularly important when

using decaffeinated coffee blends and for users

who may be allergic to caffeine.

1 or 2 cups can be selected by turning the

function controller (21). Selection determines

whether the “1 or 2 cup symbol” lights up.

Now place one or two cups under the height-

adjustable coffee outlet (13), Fig. F.

The brewing strength is continuously variable

from very mild to very strong. Select your

desired brewing strength (according to the

bar display (25)) using the brewing strength

regulator (19). The brewing strength bar rises

when the brewing strength regulator is turned

in a clockwise direction.

Any quantity of water between 15 – 200 ml

can be set. Select the quantity of water

(according to the bar display (24)) using the

water quantity regulator (20). The water

quantity bar rises when the water quantity

regulator is turned in a clockwise direction.

After making your selection, press the start

key (23). Re-pressing the start key will stop

coffee being dispensed.

Actual coffee consumption is between 6–16 g.

This depends on the amount of water used

and the strength of the coffee.

Grinder

The grinder default setting is an average one

and suitable for most kinds of coffee. If you

wish, you can use the lever (4) under the bean

container to change this setting. Only change

fineness when the grinder is running. Move

the lever to the left for finer grinding and to

the right for coarser grinding, Fig. K.

Tip: As a rule, the finer the coffee is ground the

more intensive it tastes. In order to fully enjoy

the coffee aromas, we recommend always

choosing the finest grinder setting.

Unfortunately, even with the best coffee blends,

you may still find minute stones amongst the

beans. A stone in the grinder will give off a

loud noise. In this case, shut down the

coffeemaker straight away and remove the

stone. Proceed as follows:

Shut down the appliance and pull out the

plug.

Fig. E Lock the beans chamber by turning

the bean selector switch (3) to the mid-

position.

Fig. H, I Turn the container (2) to the removal

position and remove.

Fig. L Turn the lever for setting the grinding

fineness (4) anticlockwise till it stops.

Fig. L Now take out the grinding cone and

remove the stone.

Re-assemble the grinder in the reverse order.

When replacing the grinding cone, please

ensure that the guides snap firmly into place.

ENGLISH

Melitta caffeo n 66 e 911 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info